Knierim Yachtbau Brenta 60 (2009) in vendita in Gothenburg, Svezia, Scandinavia

£447.253 GBP
Prezzo di listino €530.000 EUR
Imposta Pagato / InclusoOttieni una quotazione in valuta estera

Riepilogo generato dall'intelligenza artificiale

Il Brenta 60 'SURF', meticolosamente realizzato da Knierim Yachtbau e ideato dallo stimato designer Luca Brenta, è l'epitome della vela ad alte prestazioni e dell'artigianato di lusso. Al di là dell'estetica elegante, si dispiega una sofisticata potenza di fuoco dell'ingegneria navale. Lanciata nel 2009, questa nave su misura è stata ampiamente ristrutturata e vanta uno scafo e un timone interamente in fibra di carbonio di alta qualità, una chiglia a lama Weldox, vele in carbonio North 3Di premium e un albero e boma a V in carbonio Hall Spars. Gli interni eleganti e contemporanei comprendono un'elegante suite armatoriale, doppie cabine ospiti e una cucina generosamente attrezzata. In seguito alle necessarie riparazioni post-messa a terra nel 2016, "SURF" è stata generosamente aggiornata con un nuovo sistema elettrico e di navigazione, un motore Volvo D2-75 all'avanguardia e arredi raffinati, consolidando la sua reputazione di compagna di navigazione per eccellenza per i fine settimana, le corse o i viaggi estesi.

Informazioni generali
Marca / Modello
Knierim Yachtbau Brenta 60
Categoria
Used barca in/a vendita
Prezzo
£447.253 GBP | Prezzo di listino €530.000 EUROttieni una quotazione in valuta estera
Commento sul prezzo
The ultimate daysailer/weekender
Stato fiscale / IVA
Pagato / Incluso
Nome della barca
Surf
Anno
2009
Progettista
Luca Brenta Yacht Design
Lunghezza fuori tutto
18,62 metri
Lunghezza al galleggiamento
16,50 metri
Larghezza
4,28 metri
Pescaggio
3,40 metri
Cilindrata
16.300 kg
Scafo
Carbon
Chiglia
Chiglia a pinna
Posizione
Gothenburg, Svezia, Scandinavia

Relative informazioni Knierim Yachtbau Brenta 60

English

Comprehensively refitted and updated carbon fibre rocketship from Luca Brenta and Knierim Yachtbau in Germany. Arguably the ultimate weekend cruiser with effortless push-button control over both sail and motor.

FURTHER BROKER’S COMMENTS:

Originally launched at Knierim Yachtbau in Germany in 2009 as ‘UCA’ with a build-cost in excess of Euro 2,000,000, ‘SURF’ is arguably the ultimate ‘performance weekender’ afloat today. Designed by Luca Brenta Yacht Design, regarded by many as the originators of the concept, SURF boasts performance and elegance in spades, while remaining true to the Brenta mantra of effortless push-button control and blistering performance.

With a full carbon fibre hull, carbon rudder, Weldox blade keel, Hall Spars carbon mast and V-boom, and suit of North 3Di carbon sails, SURF’s sporting intent is quite clear and in her current ownership, SURF has competed well under ORCi rating (certificate available on request). With push-button Harken winches and Carboni hydraulic Magictrim taking care of the push-button sailing aspect, a newly installed C-Station joystick control system for the retractable bow and stern thruster and with the gear and throttle controls from the recently installed Volvo D2-75 engine, allowing effortless mooring and manouvering. Below decks, SURF boasts a super-stylish interior by John Pawson with owner’s suite forward and twin guest cabins aft.

Following a grounding in the Stockholm Archipelago 2016, SURF was recovered back to Stockholm and moved to Gothenburg where she was surveyed before necessary repairs and a comprehensive refit commenced. The refit included replacement of her electric and navigational systems, engine, standing rigging and numerous updates across the whole boat. Her specification highlights include:

• Carbon fibre hull – ultrasonically tested 2017

• Teak laid decks

• Halls Spars carbon mast and V-boom with recently replaced PBO standing rigging

• Hydraulic magic-trim mainsheet

• Harken 3-speed electric primary winches

• Carbon fibre rudder blade

• Weldox stainless steel fin keel with lead bulb – evaluated and reinforced construction

• Retractable bow and sternthrusters via C-Station joystick docking control

• Recently replaced Volvo D2-75 engine with saildrive gearbox and Gori 3-bladed propeller

• B&G H5000 instrument package with mast-mounted 20/20 displays

• 3x B&G Zeus plotters (at each helm and nav station

• AIS

• Mastervolt Lithium Ion battery banks

• Inverter

• North Sails 3di mainsail and jib

• Furling Code Zero and Gennakers

• Full galley with stove and refrigerator

• Electric heads plus holding tanks

• Webasto diesel heating

SURF’s current owners have also spent longer periods in the boat so spaces and equipment also work well for longer sailing trips.

OWNER’S COMMENTS:

"Having owned the Brenta 60 SURF (ex UCA) for 7 years, it is time to hand her over to a new owner.

The boat is fantastic in several aspects. The construction, build and equipment through out the boat is of high quality. The sailing characteristics make the boat great fun to sail and it performs well at high speed, while keeping its stability thanks to having a high proportion of the weight in the keel. I have used the boat mainly for cruising around Scandinavia but have also participated in quite a few races. It is this combination of cruising and racing that makes the Brenta 60 special. Although the boat was primarily intended for weekend cruising, I have spent more than 40 days per season onboard together with family and friends. Thanks to good equipment and ample spaces, up to 6 people can live onboard comfortably for longer periods of time. With limited customizations, the boat can be further improved for long-term cruising.

The boat generates many positive conversations in ports as many people are intrigued by the boat's beautiful and stylish design and I have made a lot of new contacts over the years. "

DESIGNER’S COMMENTS:

B60 is a high-performance sloop with a large cockpit and great comfort on deck blended with a carbon full pre-preg laminate construction to guarantee even higher rigidity and sailing performance. She’s the ultimate weekend racer yacht, built for recreational purposes but with the highest levels of manoeuvrability.

B60 follows the typical deck layout of all other B-yachts. She has push-button sail trims via hydraulic system and electric winches. All maneuvers are hidden under deck and coachroof to leave the boat geometry pure and simple.

The simple and elegant interior features a big owner’s forward cabin with head, 2 aft guest cabins, both with separate head, a generous galley and pantry and a comfortable navigation area.

BUILDER’S COMMENTS:

UCA, christened in June 2009, is already the second sailing yacht by the Italian designer Luca Brenta to be built by Knierim Yachtbau in the shipyard on the Northeast Sea Canal in Kiel. The Brenta 60 invites you to linger with thick cushions on curved coaming benches in the aft open cockpit. In the ultra-modern interior, the furniture is predominantly white, with a classic grey floor providing a contrast.

The UCA, designed for day and weekend trips, can be maneuvered with a small crew of two people or even alone, despite its size of 18.62 m, because most of the equipment can be operated with the help of hydraulics and electric drive.

A ship like a designer piece - elegant and precise, classy and yet discreet, an ultra-modern and timeless elegance. The Brenta 60 is designed for day and weekend trips and despite its length of 18.62 meters and a width of 4.28 meters, it can also be maneuvered with a small crew of two people or even alone. The owner is absolutely thrilled: "A simply terrific boat!"

And that is also underpinned by previous experiences. The yacht glides with nimble ease over smooth water in weak to moderate breezes. The fact that the Brenta 60 can cope with much more uncomfortable conditions is due to the ratio of eight tons of keel ballast to 16.3 tons of total weight. The high righting moment is enough for a regatta racer.

But the concept is completely different. Gone are the days when muscle-packed masters set the main sail, which measures almost 130 square meters. The principle is called the push of a button. Most things go on board fully automatically with the help of hydraulics and electric drive. The 73 square meter foresail can also be operated as a furling jib from the cockpit. With a crew of two, the "UCA" sails comfortably, on long courses with a gennaker. And quickly, of course, that couldn't be any other way.

The hull and deck (mold construction using a five-axis milling machine) and the structure were made in high-quality carbon pre-preg technology using a foam core under vacuum and baked at 85 degrees Celsius. This resulted in an extremely light and stiff boat that guarantees sailing fun with the aim of enjoying and enjoying the short trip.

The eye is further pampered even at a second glance. Not only the clean teak deck, but also the cockpit floor and benches - also made of teak - seem completely free of bothersome fittings, heels and any tripping hazards. Traps, straighteners and even the traveler are hidden.

The stay on board should be as pleasant as possible. The spacious cockpit, open to the aft, invites you to linger with thick cushions on curved coaming benches. The wine comes out of the wine cooler at the perfect temperature, which brings us to the spacious pantry below deck. The neon interior is white with also silver-gray upholstery and a cabin table in teak. The grey painted floor creates a pleasant contrast.

The owner's cabin is in the foredeck including its own wet room. The two aft cabins also have these. The high-quality navigation area does not show off unnecessary technical frills, but is subject to strict functionality.

Particularly smart: on the outside, the Brenta 60 does not seem to have any windows. The dark glass opening hatches, which provide subdued light and fresh air, are located in the second, inner cabin roof, which is hidden under a kind of outer hood. In doing so, the designers emphasize the flowing overall design on the one hand. On the other hand, they prevent sheets, mooring lines or other ropes from getting stuck anywhere and protect the openings from spray and rainwater at all times.

The bottom line is that this piece of jewelery from Kiel is a real eye-catcher. It embodies modernity and a direction that should no longer be reserved for Mediterranean areas.

SPECIFICATION

CONSTRUCTION

RCD Status:

• CE Category A Ocean

Hull Construction & Deck

• Composite Pre-pregs SPT carbon fibre over Corecell foam of various densities.

• The hull and deck are painted using ALEXSEAL Metallic Base Coat, Anniversary Silver.

• The side decks, fore deck, cockpit sole and seats are covered with teak battens with 5 mm black caulking. 30 mm high teak toe rail forward of the mast.

• Two built-in angled adjustable helmsman’s supports are located at the steering consoles.

• Custom made flush mounted hatches with gutters in white painted composite, all supported by gas rams.

• Bottom is treated with epoxy primer then International hard antifouling TRILUX colour grey (August 2023).

• Hull ultrasonic tested in 2017

Keel & Rudder:

• Rudder in carbon and Jp3 self-aligning bearings.

• Emergency steering system in lazarette

• Keel blade - High strength stainless steel (Weldox 900)

• Lead keel bulb –evaluated and reinforced in 2018

MACHINERY

Engine & Gearbox:

• Volvo Penta D2-75F 75hp 4-cylinder diesel engine – installed 2019 (under warranty until 2024)

• Volvo Penta 150SR-C saildrive gearbox – 2019

• Fresh water engine cooling via raw-water intake

• Single lever engine/gear control

• C-Station joystick electronic gas and gear system installed May 2021.

Service & Maintenance:

• Engine hours – approx. 310 as of January 2024

• Date of last engine service – October 2023 (service plus turbo replaced)

• Engine under extended warranty until 2024

Propulsion & Steering:

• GORI 3-bladed folding propeller

• Twin helm pedestals with 120mm hide-covered stainless steel steering wheels.

• Bow thruster - Lewmar/RMC retractable thruster mod 250, 8 kW/24v. Rubber bellows changed in 2019. Thruster controlled (in conjunction with engine) via C-Station joystick control. Zincs changed May 2022.

• Stern thruster – MAX Power R200 hydraulic retractable thruster, 8 kW/24v. Rubber bellows changed in 2019. Zincs changed May 2022.

ELECTRICAL SYSTEMS

Voltage systems:

• 12vDC start and 24vDC domestic systems plus 220vAC via shorepower or inverter

Systems Management:

• C-Zone digital switching system, Touch 5 monitor and 3 x Combination Output Interfaces (installed in bow, navigation and stern).

Battery Banks:

• 1x 12vDC AGM engine start battery

• 3x 24vDC Mastervolt MLi ULTRA Lithium 24/5000/180 joined in parallel to supply 540Ah @ 24vDC

• 1x 24vDC Mastervolt MLi ULTRA Lithium 24/5000/180 bowthruster and windlass battery

• 1x 12vDC Mastervolt MLI-E Lithium 12/1200/90 dedicated navigation instrument battery

Battery Charging & Inverter:

• Mastervolt MASS Combi ULTRA 24/3500-100 100Amp automatic battery charger for service battery bank with integral 3.5kw inverter

• 2x Mastervolt Mac PLUS DC-DC Charger 24/24-30 30Amp battery chargers for bowthruster and navigation instrument charging

Alternators:

• Volvo 12vDC engine-mounted alternator - 2019

• Mastervolt 24vDC 110 Ah engine-mounted secondary alternator for service bank

Shore Power:

• 220 V shore power system

• Mastervolt Mass GI Isolation transformer 3.5

PLUMBING & GAS SYSTEMS

Water:

• Pressurized hot/cold water system distributed to galley and bathrooms

• 40-litre SIGMAR 800 W hot water tank, heated by engine operation or 220v element

• Johnson deck wash pump for seawater circuit, hose connection in forward locker

Bilge Pumps:

• 4x Johnson electric bilge pumps, forepeak, lazarette and saloon areas

• 2x electric shower drain pumps

TANKAGE

Fuel:

• Fuel capacity - 325 litres in 1x stainless steel tank

Water:

• Water capacity – 325 litres in 1x stainless steel tank

Holding tanks:

• 2x 40 litre black water holding tanks

• Gobius monitoring system on each tank

NAVIGATION & COMMUNICATION EQUIPMENT

• B&G H5000 navigation system comprising of:-

• H5000 Hercules CPU processor

• 5x H5000 20/20 mast displays, mounted on carbon mast bracket

• 2x H5000 Graphic multi displays

• H5000 autopilot system including computer, hydraulic drive and controller.

• 3x B&G Zeus3 chart plotter displays, positioned on each steering console and at the navigation station

• B&G wind, speed and depth transducers

• B&G Precision 9 compass

Communication Equipment:

• Sailor 6217 VHF with DSC

• Garmin AIS 600

• Locomarine Yacht router Mini for internet connection. Also included Locomarine wifi booster antenna (not mounted)

DOMESTIC EQUIPMENT

Galley:

• Dometic model 433 Moonlight stainless steel gimballing stove with 3x gas burners and oven.

• TRUMA gas remote switch in external gas storage

• Work surface finished in Corian

• VOLA design tap in matt finish

• Isotherm 24vDC refrigerator

Heads:

• Sanmarine 24vDC electric flush and Jabsco manual, freshwater flushing

• Hot & cold-water supplies with shower in heads

• VOLA design tap in matt finish

Heating:

• Webasto diesel-fired hot air heating system – supplied, but not yet installed

Entertainment:

• Fusion RA70 stereo incl Helix 6-channel amplifier and 6 speakers, 4 in lounge and 2 in cockpit.

ACCOMMODATION

Summary of Accommodation:

• 6 berths in 3 cabins plus saloon.

• 2 heads compartments.

• Owners cabin in the bow section with separated head.

• Spacious lounge with a galley and navigation station.

• Guest cabin on starboard with separate head and another guest cabin to port.

• The lounge benches can be used as occasional berths.

DECK EQUIPMENT

Rig:

• Hall Spar high modulus carbon fibre mast and V-boom

• Mast and boom ultrasonic tested in 2017

• Keel-stepped fractional-rigged mast with three sets of swept-back spreaders

• PBO standing rigging from Future Fibres, new in 2018/2019

• Stainless steel rod forestay- replaced 2019

• Cariboni mast jack cylinder with manual Holmatro pump

• Cariboni hydraulic trim system for mast and main sail, including main sheet (Magic trim), vang, traveller, outhaul and backstay.

• Harken switch track for mainsail and trysail

• Hall Spars carbon spinnaker pole

• Reckmann RS2000 sub-deck jib furler

• Profurl gennaker furler

• Furler for Code Zero

• Deck gear Harken, custom light grey anodized.

• Spinlock jammers, Alloy ZS1214 x 10

Sails:

• North Sails 3Di, fully battened mainsail (760 Aramid/Dyneema) with 2x reefs - 2013 (good condition)

• North Sails 3Di 105% furling jib (760 Aramid/Dyneema) - 2013 (good condition)

• North Sails Code Zero 139sqm with furler - 2014 (serviceable condition)

• Beiken gennaker A5 244sqm with Profurl furler - 2009 (serviceable condition)

• Storm jib, new (for ORCi rating)

• Trysail with Harken cars, used a few times (for ORCi rating)

Winches:

• 2x Harken 990 3-speed electric primary winches - custom light grey anodized.

• 2x Harken 50.2 2-speed manual winches secondary winches- custom light grey anodized.

General:

• Pushpit and pulpit with twin guardwires and guardrail stanchions

• Folding passarelle

• Ensign staff

Anchoring & Mooring:

• Anchorlift Aquarius 24vDC 2500 W electric anchor windlass

• Folding stainless steel anchor arm

• 25 kgs Delta stainless steel anchor with 10mm chain

• Spare 16kgs Delta anchor

• Folding cleats from Versari del Monte

• 6x Inflatable fenders

• Assorted mooring ropes

• Boathook

Covers, Cushions & Canvas:

• Mainsail cover in silver grey

• Jib furler cover in silver grey (plus spare in navy blue)

• Sun or rain awning covering whole deck and cockpit in silver grey

• Wheel covers in silver grey

• Winch covers in silver grey

• Protective fabrics for freeboard x 2

• Winter cover in heavy tarpaulin (4 parts)

SAFETY EQUIPMENT:

General note on safety equipment: Any safety equipment such as liferafts, Epirbs, fire extinguishers and flares etc. are usually personal to the current owner(s) and if being left on-board as part of the sale of a used vessel may require routine servicing, replacement, or changing to meet a new owners specific needs.

• Lopo LED Navigation lights

• Jonbuoy MOB in silver metallic finish

• Jackstays on deck x 2

Fire Control:

• Fire extinguisher x 5

• Fire port for engine room

VIEWING ARRANGEMENTS

Lying – Gothenburg, Sweden

Available to view strictly by appointment

Office Hours Mon- Fri 0900 – 17.00

Saturday by prior appointment

For more information or to arrange a viewing please contact us.

Please Note: Due to the varying locations of our yachts, your travel time and the distances that may be involved, we recommend that you only make arrangements to view if you are actively considering purchase.

Lead Broker: Matias Renlund – Grabau International (Scandinavia)

Tel: +358406861501

Email: enquiries@grabauinternational.com

Continua a leggere

Propulsione
Motore
Volvo Penta D2-75 75hp
Ore di funzionamento del motore
310
Carburante
Diesel
Capacità del serbatoio
325 litri
Alloggio
Numero di cabine
3
Numero di cuccette
6
Capacità di acqua potabile
325 litri

Grabau International offers the details of all vessels in good faith but cannot guarantee or warrant the accuracy of this information or warranty the condition of any vessel and the details do not constitute a part of any contract. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. All vessels are offered subject to prior sale, price change, or withdrawal without notice. Grabau International provides professional yacht conveyancing and legal transfer of title for all yachts as per the ABYA Code of Practice with all deposit payments and final balance payments processed through secure dedicated client accounts solely for that purpose. Our dedicated client accounts are written in trust at Natwest Bank and we are fully insured.

Questo Knierim Yachtbau Brenta 60 è stato visualizzato 6462 volte
Broker/Rivenditore Informazioni

Grabau International

82 Gosport Street
Lymington
Hampshire
SO41 9BD
United Kingdom
Fai sapere che hai visto questa barca su TheYachtMarket.
XXXX XXX XXX
ABYA Logo
ABYA YACHT BROKER

Definiamo gli standard di mediazione e trasporto di yacht dal 1912

Scopri di più

Grazie

Il tuo messaggio è stato inviato.

Richiedi altre foto

Invia a un amico per email

Inviando questo modulo, accetti la nostra Informativa sulla privacy e la nostra Politica sui cookie

Inviando questo modulo, accetti la nostra Informativa sulla privacy e la nostra Politica sui cookieSito protetto da Google reCAPTCHA Si applicano l'Informativa sulla privacy e i Termini di servizio

Segnala questa barca

Grazie! Il tuo messaggio è stato inviato

Perché non registrare il tuo interesse per queste barche simili?

Ai venditori delle barche che hai selezionato invieremo i seguenti dettagli: il tuo nome, indirizzo email, numero di telefono (se fornito), paese e le barche a cui sei interessato.

Richiedi maggiori informazioni

Barca precedenteBarca successiva

Cambia unità di misura

Questa funzione richiede l'abilitazione di alcuni cookie sul tuo browser.

Mostra prezzo in:

Mostra lunghezze, larghezza e pescaggio in:

Mostra la cilindrata o il peso in:

Mostra capacità o volume in:

Mostra velocità in:

Mostra distanza in: