Beneteau Oceanis Clipper 373 (2005) in vendita in Poros, Grecia

£54.251 GBP
Prezzo di listino €65.000 EUR
Imposta Non pagato / esclusoOttieni una quotazione in valuta estera

Riepilogo generato dall'intelligenza artificiale

Il Beneteau Oceanis Clipper 373, situato a Poros, in Grecia, è un modello del 2005 che vanta una lunghezza di 11,25 metri e una larghezza di 3,73 metri. Questo yacht ben tenuto, presentato dal suo proprietario originale, è alimentato da un affidabile motore Yanmar 3JH4E da 40 CV, adatto per la crociera nel Mediterraneo. Dotata di un ampio layout a tre cabine, l'imbarcazione offre interni confortevoli completati dal suo design ergonomico di coperta e pozzetto. Le caratteristiche degne di nota includono una randa performante, aggiunte recenti come un nuovo Bimini e un dissalatore, equipaggiamento di sicurezza completo e sistemi a risparmio energetico come pannelli solari e luci a LED. Ulteriori comfort come un grande frigorifero/congelatore, acqua pressurizzata e una spaziosa cucina migliorano il comfort a bordo. Nonostante piccoli problemi con il rivestimento del padiglione e l'interruttore di alimentazione a terra, questo yacht è in eccellenti condizioni generali, pronto per nuove avventure con un'indagine completa disponibile su richiesta.

Informazioni generali
Marca / Modello
Beneteau Oceanis Clipper 373
Categoria
Used barca in/a vendita
Prezzo
£54.251 GBP | Prezzo di listino €65.000 EUROttieni una quotazione in valuta estera
Stato fiscale / IVA
Non pagato / escluso
Nome della barca
VALLESKA
Anno
2005
Progettista
Berret - Racoupeau
Lunghezza fuori tutto
11,25 metri
Larghezza
3,73 metri
Pescaggio
1,91 metri
Chiglia
Chiglia a bulbo
Posizione
Poros, Grecia

Relative informazioni Beneteau Oceanis Clipper 373

English

Three cabin Beneteau Oceanis Clipper 373 is auxiliary powered by a 40Hp Yanmar 3JH4E engine found in great condition and the perfect location for Med. cruising, now offered by her first and only owner as he has found his next boat. 

The designers blended volume, comfort, high performance and, elegance to create the Beneteau Oceanis Clipper 373. The slender hull, well-balanced sail plan and, keel enhance upwind performance and give directional stability and helm balance when heeled.

The split-level deck layout of the Beneteau Oceanis Clipper 373 combines greater headroom with fluid aesthetics. The cockpit is very spacious and ergonomic. The cunningly designed removable helmsman's seat simplifies access to the bathing platform, whilst the removable door step makes the companionway very practical.

Unrivalled circulation is possible thanks to the patented, steering wheel, which can be swiveled out of the way to clear the cockpit, still leaving all the instruments on the helm pedestal.

Key features of this Beneteau Oceanis Clipper 373 include - Fully battened performance mainsail with roller cars, spare main and genoa, low stretch halyards, lazybag (New 2022), Bimini (new 2023), 2 x chart plotters (one New 2021), VHF radio DSC, autopilot, Bimini (new 2023), large fridge /freezer, pressurised water with Hubler water meter (new 2016), transom shower, watermaker (New 2023), LED cabin lights, house batteries (New 2024), engine battery (New 2022), 800 W inverter, battery charging by engine alternator, Battery charger with smart battery management system which can link to a smart phone and, Solar with 2x120W solar panels with controller to house batteries (New 2021), 1x 100W solar panel with controller to engine battery (New 2019), windlass (new 2023), 80m chain (new 2017), 1x 20kg anchor (New 2021) and 1x anchor (New 2021)

Complete with Safety Equipment that includes 1 manual and 1 electric bilge pump, 8 man life raft ( serviced 2023), Flares current 2024 and, Lalizas life sling

This this Beneteau Oceanis Clipper 373 benefits from a 2.7m Hercules inflatable tender (New 2021) and Tohatsu 3.5hp outboard

Brokers Comments

June 2021 Survey available on request.
The rigging was checked by a rigger in April 2024.
Storage ashore until the end of April 2025 and full tank of fuel included.
Duvets and fitted sheets included.

The current end of season issues are noted:

The head liner in the starboard aft cabin needs re fixing
Control panel shore power switch keeps tripping / when using the shore power to heat the water (engine water heating is fine)
Anchor hand piece control is reversed ie down is up (The control in the cockpit is correct)

Hull Construction

The hull is single-skinned GRP construction. Reinforced points (keel, rudder, chain plates, hull-deck joint) help to strengthen the structure. A structural inner moulding is bonded and laminated to the hull. Its structural role is important as it takes and absorbs the stresses at pressure points (shroud chainplate tie rods, keel, rudder, etc.), and spreads any loads guaranteeing reduced strain on the hull. The surface material of the inner moulding makes cleaning easier and provides a better finish.

Deck and Deck equipment

The deck is sandwich construction (glass fibre and balsa) for an optimal strength/weight ratio and excellent thermal and sound insulation.
A  diamond point non-slip surface increases safety over all areas of movement on deck.

Cockpit

Pivoting helm seat allows easy access to bathing platform.
2 side cockpit lockers
2 aft cockpit lockers.
1 separate, watertight gas locker.
2 teak-slatted helm benches at each side of cockpit.
All cockpit benches are teak-slatted.
A steering wheel console takes navigation instruments.
Steering compass on console.
Control lever to starboard cockpit coaming.
12V cigarette lighter socket on console.
Handrail.
Cup holder.
Manual bilge pump.
Waterproof speakers in cockpit.
GRP cockpit table.
Cockpit cushions.

Bathing Platform and Transom

Transom with teak covered bathing platform.
Stainless steel bathing ladder with teak treads.
Outboard motor bracket.
Protective rubber rubbing strake to transom.
Cold water cockpit shower.

Sails

PERFORMANCE Pack on this Beneteau Oceanis Clipper 373 includes:
Fully battened performance mainsail with roller cars.
Belly compensating jib (foam layer to middle of luff allowing the jib to furl better, and giving the jib a flatter belly when partially furled).
Anti-UV strip to jib.
Low stretch halyards.
2 x Genoa
2 x Mains
Slab reefing to cockpit
Lazybag (New 2022)

Navigation equipment

Navman chart plotter
Onwa chart plotter/ AIS combo (New 2021)
NASA wireless wind instrument (New 2019)
VHF radio DSC
Handheld radio
Raymarine ST 60 Tridata instrument (log, speed and depth sounder, with transducers). 
Raymarine ST6001 autopilot (controller, computer, helm drive and cable).

Exclusive PACK

Exclusive PACK (on this Beneteau Oceanis Clipper 373 includes:
Large sprayhood in Captain blue with 2 stainless steel frames, for bimini. 
Dodger (new 2016)
Bimini (new 2023)

Galley

Laminated work surface with moulded wood fiddle.
Stainless steel double sink.
Mixer tap with hot and cold pressurised water.
Chopping board.
Crockery cutlery 
Gimballed gas Eno 2 burner hob and oven with protective stainless steel safety rail.
Large fridge /freezer
2x gas cylinders
Gas alarm
Smoke alarm

Ample stowage:
Stowage with hinged doors under hob.
Cutlery drawer.
4 storage shelves with doors along the hull.
Stowage under sink.
Waste bin under sink. 
2 deckhead lights:
1 over sink
1 over hob.
Opening port with curtains over hob for good ventilation.

Water

Pressurised water with Hubler water meter (new 2016)
Calorifier with 40 l tank 
Transom shower 
360 liter water in 2 tanks
Saltech 40l per hour watermaker (New 2023)

Electrical

All cabin lights LED 

3x110 Victron 110Ah AGM house batteries (New 2024)
1x 100Ah. Engine battery (New 2022)
800 W inverter

Electrical panel:
12-switch 12V electrical panel plus 3 x 220V switches.
Cigarette lighter socket.
Voltmeter.
Battery charge warning light.

Battery charging:
Battery charging by engine alternator, Battery charger and Solar
Victron BMS 712 smart battery management system which can link to a smart phone.
2x120W Victron solar panels with victron MPPT controller to house Batteries (New 2021)
1x 100W solar panel with PWM controller to engine battery (New 2019)

Approved navigation lights.
Bow and stern navigation lights.
Anchor light.
Mast head light (new 2024) - solar powered wireless LED light controlled by a remote control from the cockpit which can cycle though tricolor, fixed or strobe anchor light and flash SOS.

Machinery

Engine 40hp Yanmar 3JH4E approx 3000 hours 
Regularly serviced professionally with all new filters and new impeller after each season
125 liter tank (tank cleaned 2024)
Engine compartment with foam sound-proofing.
Engine control panel with rev counter and alarms to starboard cockpit coaming.
Stainless steel propeller shaft with GRP protection moulded into the hull.
Fixed three-blade propeller.
Engine mounting built into the inner mould.
Rotomoulded 115L diesel tank aft.
Saltwater and diesel filters with sediment reservoirs.

Mooring and Anchoring

Lofrans 1000 W windlass (new 2023)
80 m lofrans G40 chain (new 2017)
1x 20kg Rocna anchor (New 2021)
1x 35 lb Delta anchor
1x Fx18 Fortress anchor (New 2021)
Stainless steel bow fitting with offset roller to allow anchor stowage under way.
2 roller fairleads amidships.
2 roller fairleads and 2 x 300mm aluminium mooring cleats at the stern.
2 x 300mm aluminium mooring cleats at the bow.
Self-draining anchor well with clinch fitting.

Safety Equipment

1 manual and 1 electric bilge pump
8 man life raft ( serviced 2023)
Flares current 2024
Lalizas life sling

Tender and Outboard

2.7m Hercules inflatable tender (New 2021)
Tohatsu 3.5hp outboard

Features

  • Total sail area - 722.00

Nicolle Associates offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.

  • This vessel is VAT not paid.
  • As always photographs do not do justice so a viewing is highly recommended.
  • This boat is lying in Poros, Greece.
  • © 2024 Nicolle Associates

Continua a leggere

Propulsione
Motore
1 x Yanmar 3JH4E
Ore di funzionamento del motore
3000
Carburante
Diesel
Capacità del serbatoio
125 litri
Questo Beneteau Oceanis Clipper 373 è stato visualizzato 17 volte
Broker/Rivenditore Informazioni

Nicolle Associates - Hamble

Saltmakers House Hamble Point Marina School Lane
Hamble
SO31 4NB
United Kingdom
Fai sapere che hai visto questa barca su TheYachtMarket.
XXXX XXX XXX

Grazie

Il tuo messaggio è stato inviato.

Richiedi altre foto

Invia a un amico per email

Inviando questo modulo, accetti la nostra Informativa sulla privacy e la nostra Politica sui cookie

Inviando questo modulo, accetti la nostra Informativa sulla privacy e la nostra Politica sui cookieSito protetto da Google reCAPTCHA Si applicano l'Informativa sulla privacy e i Termini di servizio

Segnala questa barca

Grazie! Il tuo messaggio è stato inviato

Perché non registrare il tuo interesse per queste barche simili?

Ai venditori delle barche che hai selezionato invieremo i seguenti dettagli: il tuo nome, indirizzo email, numero di telefono (se fornito), paese e le barche a cui sei interessato.

Richiedi maggiori informazioni

Barca successiva

Cambia unità di misura

Questa funzione richiede l'abilitazione di alcuni cookie sul tuo browser.

Mostra prezzo in:

Mostra lunghezze, larghezza e pescaggio in:

Mostra la cilindrata o il peso in:

Mostra capacità o volume in:

Mostra velocità in:

Mostra distanza in: