Sunseeker 116 Yacht (2019) à vendre dans Turquie

£9 823 758 GBP
Prix répertoriés €11 900 000 EUR
Taxe Non payé(e)/exclu(e)

Sunseeker 116 Yacht - 51 - Tender Garage

Résumé généré par l'IA

Le yacht Sunseeker 116 « ARES » à vendre en Turquie est un impressionnant navire de 35,20 mètres, remarquable par ses spécifications avancées et son design moderne. Construit en 2019, ce yacht offre une expérience de superyacht sophistiquée, avec un aménagement ouvert avec un intérieur contemporain élégant. L'hébergement comprend une spacieuse suite principale sur toute la largeur sur le pont principal avec une salle de bains double, complétée par des cabines invités supplémentaires sur le pont inférieur, chacune équipée d'une salle de bains privative. Les améliorations apportées au yacht comprennent des armoires sur mesure, des systèmes de navigation avancés, des stores à enroulement solaire, des meubles sur mesure et des appareils électroniques haut de gamme, faisant de l'ARES l'un des modèles 116 les plus sophistiqués jamais construits.

À propos de Sunseeker 116 Yacht

Informations générales

Marque/modèle
Sunseeker 116 Yacht

Prix
£9 823 758 GBP | Prix répertoriés €11 900 000 EUR

Régime fiscal / TVa
Non payé(e)/exclu(e)

Catégorie
Used bateau pour vente

Nom du bateau
ARES

Année
2019

Concepteur
Sunseeker International Ltd

Emplacement
Turquie

ARES is one of the highest spec 116's ever built.

This cutting-edge 116 Yacht takes Superyacht sophistication to the next level with a spectacular deck and superstructure, open-plan layout and stylish modern interior

Built upon the proven platform of its hugely popular predecessor, the 115 Sport Yacht, the 116 Yacht combines superb performance with our iconic personalisation.

Accommodation

The accommodation comprises of a large main deck full beam master cabin with double Ensuite, the accommodation continues on the lower deck with another full beam guest double and a further two twin guest cabins port and starboard.

Each Cabin has its own Ensuite bathroom.

Additional

Special design cabinets to be fitted to lower deck staircase lobby either side of staircase. Design as per JJ drawings with Opti grey glass mirrored front to doors and adjustable shelving, no hanging space.
Storage console unit required in Beach Club on Port side to accommodate integrated freezer with worktop above. Beach club to have cosmetic linings of Diamante Snow applied as panels with stainless steel inlays where possible. Console unit to be manufactured in white laminate.
Beds to have mattress spacer material to all beds without slatted bases, Bolsters to be adjusted accordingly
Slatted bed bases to be fitted in lieu of standard where possible allowing for storm shutter storage etc
Main deck saloon Cabinetry unit to be fitted based upon design of rise and fall TV cabinetry but to be no higher than settee and to have 4 doors with shelved storage inside
Solar Solve to carry out site visit to evaluate possibility of fitting solar roller blinds
Flybridge sun loungers and directors chairs to be Dealer supply. Protective cover to be manufactured for sun loungers in there stored position on deck
Moulded knee rest with Teak top to be fitted to aft wings station locations
Lid to be fabricated for the aft cockpit wetbar BBQ
Side mount stairway in Platinum package to be upgraded to C-Quip Carbon fibre 8 step side mount stair with slewing facility to allow stairs to be used when alongside
Special reinforced cover to encapsulate Flybridge staircase safety rail and gate with access door
Special Besenzoni Flybridge Helmseats confirmed and to be fitted in lieu of standard
Additional Portable air compressor OP20P to be supplied and stored securely in Foredeck locker
AC Outlet in waterproof enclosure to be fitted inside port and starboard platform cupboards with cable cut-out in doors
Dimmer switches on exterior overhead aft cockpit and flybridge hardtop lighting and fly low level lighting
1x AC220v Euro 2 pin double socket in waterproof enclosure to be installed on each exterior table pedestal on the underside of the table top
AC Sockets to port outboard behind L shaped seating group to have one Euro socket and double USB charging socket fitted in lieu of standard
2 x Porta Romana Medium Pasteur Lamp GLB02M with 14’’ Cylinder Putty silk shade to be fitted on the Port and starboard aft console units in the Saloon.
Additional pair of AC sockets to each end of the L shaped seating group at low level
Additional AC socket in waterproof enclosure to forward outboard upstand of upper bar top on wet bar and additional AC socket in waterproof enclosure at aft end of upstand of upper bar top
Additional AC power socket and LAN socket wired to router to be fitted to outboard upstand directly above staircase deckhead where Clock and barometer are normally fitted – Clock and Barometer to be packed onboard
Backlit signwriting for garage door and Port & Stbd sides of superstructure
Underfloor heating required for Garage/Storeroom/Beachclub
Instructions for Dishwasher including sticker inside door and washing machines etc to be in German, available form Miele by request
Additional DMS CCTV cameras to be mounted to outboard sides of Flybridge moulding at lowest point of side deck overhang, one each side looking forward for lock entry interfaced to wing stations. Both cameras to be fed into wing docking station monitors along with bow camera
Independent Transas Nav system required with DVI to Hattaland screen for built in redundancy – SES to interface
Furuno FI-70 displays to be added – one to each wing station interfaced into nav system for displaying depth, speed and wind information available via the NMEA0183
Transas chart portfolio TX-97 chart folio EUR010EL to be supplied and loaded into the Navigation PC. Supplied and installed by SES
Additional CCTV camera DMS supply to be fitted to Radar mast facing aft for stern docking interfaced into Tijssen system
MF antenna type and mounting arrangement to be reviewed to allow bridge clearance of 10.5m
Sailor 900 Vsat system with a 103CM dish to match the TV satellite system
SES To fit 4TB NAS Drive to Tech space connected to ships network Ethernet switch
Saloon, Main Deck Master and Lower Deck VIP televisions to be upgraded to LG OLED W8 series in lieu of contracted spec. 77’’ in Main Deck Saloon (bulkhead mounted), 65’’ in Main Deck Master and 65’’ in Lower Deck VIP. Credit for Samsung televisions and Saloon rise and fall included
Accent to superstructure above foredeck access staircase to be sprayed white
Additional AC Sockets and USB outlets in beach club above appliances
Additional robe hooks to be added in locations agreed with crew
All exterior covers to have strap fastenings in lieu of poppers
All main deck dining windows to have venetian blinds fitted outboard of Roman blinds in Ebony 25mm
Covers to be made for all Life rings and Smoke/light buoys in Stamoid Light Pearl Grey
Data cable to be run from desk to dressing room for connection to owners printer
Drainage tube to be added to wing stations cup holders and hole to be made at aft low point to aid drainage away from cables
Flybridge upholstered arm rests to be fitted to Port L shape seat (inboard arm) and Starboard L shape seat (inboard arm)
HDMI outlet to be connected to Bose HDMI input
Lifebuoys to be fitted on outboard bulwark and directly forward of side deck wing stations in lieu of standard location
Loose Square Pouffe required in Master Stateroom, upholstered in Whistler Syracuse Broken Shell SYR237
Lower Deck – Master Cabin – Port side to have half-length chaise style sofa with extended storage unit forward in lieu of standard. Please refer to GA for layout
Main Deck Saloon stern sliding patio doors. Electric operation. In the Main Deck Saloon
Main Galley Custom Fridge Freezer to have 3x Fridge and 1x Freezer compartments in lieu of standard. Lower fridge to have integral salad drawer and upright storage for bottles above
Sales Office to arrange quotation
Manually operated Black out Blinds for the Port Forward Guest Stateroom and the Starboard Forward Guest Stateroom
Master Stateroom to have blackout curtains in lieu of blinds
Non Slip adhesive vinyl to be added to areas above side deck staircases and to top of hard top with additional supplied for further application
Preparation only required for future fit of table lamp on console in entrance to Master Stateroom. No holes to be drilled on top
Preparation only required for future fitment of Jet Ski crane and chock system. To include tapping plates and power supply. Winch and track assembly not to be supplied
Removable teak step in lieu of folding step at flybridge helm 26CM high and width of outboard helm seat and centre console
Roman day blind to be fitted in Master cabin – OceanAir Day Roller Blind AVALANCHE RP2
Towel rail to be fitted to in front of galley sink – location as agreed with production
Removable Carbon Fibre stairway cover panel
Additional cosmetic panelling to Tender Garage/Beach club including ceiling and alternate lighting
HP LaserJet Pro MFP M177fw Laser Multifunction Printer with Fax
Laurastar S4a ironing board
Marine cloud
Fenders and fender covers, Canvas work tend cover and pattern work (Heemeier)
Special Beddings for crew cabins
Cleaning items Baudoin Wash-systems Ocean
Docking ropes
Engine and generator spares
6 x Anti-chafe rope cover black, 6 x Fender hooks
Additional tools from Toolbits
Additional compressor
Quick Handheld remote control for Bathing Platform
Sleipner RCS-20E bow/stern thruster control
3M Peltor Litecom Speak and Listen Electronic Ear Defenders
Baudoin deck wash equipment
Draper telescopic ladder TL13A
Maps from Todd Navigation
2 x Dyson V11 Absolute Gold vacuum cleaners (£499.17 each)
iDirect X7 Modem Configured and full set up including Delivery (SES)
6 x mattresses from Dimag

Construction

Coque
GRP Hull number:72119116

Mesures

Longueur totale
35,20 mètres

Largeur
7,34 mètres

Tirant d’eau
2,44 mètres

Déplacement
140 000 kg

Propulsion

Moteur
2 x MTU

Carburant
Diesel

Vitesse maximum
46 km/h