Beneteau Oceanis Clipper 373 (2005) para vender en Poros, Grecia

£53.830 GBP
Precio publicado €65.000 EUR
Impuesto No pagado/ No incluidoObtenga una cotización en moneda extranjera

Resumen generado por IA

El Beneteau Oceanis Clipper 373, ubicado en Poros, Grecia, es un modelo de 2005 que cuenta con una eslora de 11,25 metros y una manga de 3,73 metros. Este yate bien mantenido, presentado por su propietario original, está propulsado por un confiable motor Yanmar 3JH4E de 40 Hp, adecuado para cruceros por el Mediterráneo. Con un espacioso diseño de tres camarotes, el barco ofrece interiores cómodos complementados con su diseño ergonómico de cubierta y cabina. Las características notables incluyen una vela mayor de alto rendimiento, adiciones recientes como un nuevo Bimini y un desalinizador, equipo de seguridad integral y sistemas de eficiencia energética como paneles solares y luces LED. Las comodidades adicionales como un refrigerador/congelador grande, agua presurizada y una cocina espaciosa mejoran la comodidad a bordo. A pesar de los pequeños problemas con el revestimiento del techo y el interruptor de alimentación de tierra, este yate está en excelentes condiciones generales, listo para nuevas aventuras con una inspección completa disponible a pedido.

Información general
Marca/modelo
Beneteau Oceanis Clipper 373
Categoría
Used barco para vender
Precio
£53.830 GBP | Precio publicado €65.000 EURObtenga una cotización en moneda extranjera
Situación fiscal/IVA
No pagado/ No incluido
Nombre del barco
VALLESKA
Año
2005
Diseñador
Berret - Racoupeau
Eslora total
11,25 metros
Manga
3,73 metros
Calado
1,91 metros
Quilla
Quilla con bulbo
Ubicación
Poros, Grecia

Acerca de este Beneteau Oceanis Clipper 373

English

Three cabin Beneteau Oceanis Clipper 373 is auxiliary powered by a 40Hp Yanmar 3JH4E engine found in great condition and the perfect location for Med. cruising, now offered by her first and only owner as he has found his next boat. 

The designers blended volume, comfort, high performance and, elegance to create the Beneteau Oceanis Clipper 373. The slender hull, well-balanced sail plan and, keel enhance upwind performance and give directional stability and helm balance when heeled.

The split-level deck layout of the Beneteau Oceanis Clipper 373 combines greater headroom with fluid aesthetics. The cockpit is very spacious and ergonomic. The cunningly designed removable helmsman's seat simplifies access to the bathing platform, whilst the removable door step makes the companionway very practical.

Unrivalled circulation is possible thanks to the patented, steering wheel, which can be swiveled out of the way to clear the cockpit, still leaving all the instruments on the helm pedestal.

Key features of this Beneteau Oceanis Clipper 373 include - Fully battened performance mainsail with roller cars, spare main and genoa, low stretch halyards, lazybag (New 2022), Bimini (new 2023), 2 x chart plotters (one New 2021), VHF radio DSC, autopilot, Bimini (new 2023), large fridge /freezer, pressurised water with Hubler water meter (new 2016), transom shower, watermaker (New 2023), LED cabin lights, house batteries (New 2024), engine battery (New 2022), 800 W inverter, battery charging by engine alternator, Battery charger with smart battery management system which can link to a smart phone and, Solar with 2x120W solar panels with controller to house batteries (New 2021), 1x 100W solar panel with controller to engine battery (New 2019), windlass (new 2023), 80m chain (new 2017), 1x 20kg anchor (New 2021) and 1x anchor (New 2021)

Complete with Safety Equipment that includes 1 manual and 1 electric bilge pump, 8 man life raft ( serviced 2023), Flares current 2024 and, Lalizas life sling

This this Beneteau Oceanis Clipper 373 benefits from a 2.7m Hercules inflatable tender (New 2021) and Tohatsu 3.5hp outboard

Brokers Comments

June 2021 Survey available on request.
The rigging was checked by a rigger in April 2024.
Storage ashore until the end of April 2025 and full tank of fuel included.
Duvets and fitted sheets included.

The current end of season issues are noted:

The head liner in the starboard aft cabin needs re fixing
Control panel shore power switch keeps tripping / when using the shore power to heat the water (engine water heating is fine)
Anchor hand piece control is reversed ie down is up (The control in the cockpit is correct)

Hull Construction

The hull is single-skinned GRP construction. Reinforced points (keel, rudder, chain plates, hull-deck joint) help to strengthen the structure. A structural inner moulding is bonded and laminated to the hull. Its structural role is important as it takes and absorbs the stresses at pressure points (shroud chainplate tie rods, keel, rudder, etc.), and spreads any loads guaranteeing reduced strain on the hull. The surface material of the inner moulding makes cleaning easier and provides a better finish.

Deck and Deck equipment

The deck is sandwich construction (glass fibre and balsa) for an optimal strength/weight ratio and excellent thermal and sound insulation.
A  diamond point non-slip surface increases safety over all areas of movement on deck.

Cockpit

Pivoting helm seat allows easy access to bathing platform.
2 side cockpit lockers
2 aft cockpit lockers.
1 separate, watertight gas locker.
2 teak-slatted helm benches at each side of cockpit.
All cockpit benches are teak-slatted.
A steering wheel console takes navigation instruments.
Steering compass on console.
Control lever to starboard cockpit coaming.
12V cigarette lighter socket on console.
Handrail.
Cup holder.
Manual bilge pump.
Waterproof speakers in cockpit.
GRP cockpit table.
Cockpit cushions.

Bathing Platform and Transom

Transom with teak covered bathing platform.
Stainless steel bathing ladder with teak treads.
Outboard motor bracket.
Protective rubber rubbing strake to transom.
Cold water cockpit shower.

Sails

PERFORMANCE Pack on this Beneteau Oceanis Clipper 373 includes:
Fully battened performance mainsail with roller cars.
Belly compensating jib (foam layer to middle of luff allowing the jib to furl better, and giving the jib a flatter belly when partially furled).
Anti-UV strip to jib.
Low stretch halyards.
2 x Genoa
2 x Mains
Slab reefing to cockpit
Lazybag (New 2022)

Navigation equipment

Navman chart plotter
Onwa chart plotter/ AIS combo (New 2021)
NASA wireless wind instrument (New 2019)
VHF radio DSC
Handheld radio
Raymarine ST 60 Tridata instrument (log, speed and depth sounder, with transducers). 
Raymarine ST6001 autopilot (controller, computer, helm drive and cable).

Exclusive PACK

Exclusive PACK (on this Beneteau Oceanis Clipper 373 includes:
Large sprayhood in Captain blue with 2 stainless steel frames, for bimini. 
Dodger (new 2016)
Bimini (new 2023)

Galley

Laminated work surface with moulded wood fiddle.
Stainless steel double sink.
Mixer tap with hot and cold pressurised water.
Chopping board.
Crockery cutlery 
Gimballed gas Eno 2 burner hob and oven with protective stainless steel safety rail.
Large fridge /freezer
2x gas cylinders
Gas alarm
Smoke alarm

Ample stowage:
Stowage with hinged doors under hob.
Cutlery drawer.
4 storage shelves with doors along the hull.
Stowage under sink.
Waste bin under sink. 
2 deckhead lights:
1 over sink
1 over hob.
Opening port with curtains over hob for good ventilation.

Water

Pressurised water with Hubler water meter (new 2016)
Calorifier with 40 l tank 
Transom shower 
360 liter water in 2 tanks
Saltech 40l per hour watermaker (New 2023)

Electrical

All cabin lights LED 

3x110 Victron 110Ah AGM house batteries (New 2024)
1x 100Ah. Engine battery (New 2022)
800 W inverter

Electrical panel:
12-switch 12V electrical panel plus 3 x 220V switches.
Cigarette lighter socket.
Voltmeter.
Battery charge warning light.

Battery charging:
Battery charging by engine alternator, Battery charger and Solar
Victron BMS 712 smart battery management system which can link to a smart phone.
2x120W Victron solar panels with victron MPPT controller to house Batteries (New 2021)
1x 100W solar panel with PWM controller to engine battery (New 2019)

Approved navigation lights.
Bow and stern navigation lights.
Anchor light.
Mast head light (new 2024) - solar powered wireless LED light controlled by a remote control from the cockpit which can cycle though tricolor, fixed or strobe anchor light and flash SOS.

Machinery

Engine 40hp Yanmar 3JH4E approx 3000 hours 
Regularly serviced professionally with all new filters and new impeller after each season
125 liter tank (tank cleaned 2024)
Engine compartment with foam sound-proofing.
Engine control panel with rev counter and alarms to starboard cockpit coaming.
Stainless steel propeller shaft with GRP protection moulded into the hull.
Fixed three-blade propeller.
Engine mounting built into the inner mould.
Rotomoulded 115L diesel tank aft.
Saltwater and diesel filters with sediment reservoirs.

Mooring and Anchoring

Lofrans 1000 W windlass (new 2023)
80 m lofrans G40 chain (new 2017)
1x 20kg Rocna anchor (New 2021)
1x 35 lb Delta anchor
1x Fx18 Fortress anchor (New 2021)
Stainless steel bow fitting with offset roller to allow anchor stowage under way.
2 roller fairleads amidships.
2 roller fairleads and 2 x 300mm aluminium mooring cleats at the stern.
2 x 300mm aluminium mooring cleats at the bow.
Self-draining anchor well with clinch fitting.

Safety Equipment

1 manual and 1 electric bilge pump
8 man life raft ( serviced 2023)
Flares current 2024
Lalizas life sling

Tender and Outboard

2.7m Hercules inflatable tender (New 2021)
Tohatsu 3.5hp outboard

Features

  • Total sail area - 722.00

Nicolle Associates offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.

  • This vessel is VAT not paid.
  • As always photographs do not do justice so a viewing is highly recommended.
  • This boat is lying in Poros, Greece.
  • © 2024 Nicolle Associates

Más información

Propulsión
Motor
1 x Yanmar 3JH4E
Horas del motor
3000
Combustible
Diesel
Capacidad de combustible
125 litros
Este Beneteau Oceanis Clipper 373 ha sido visto 13 veces
Bróker/Concesionario Información

Nicolle Associates - Hamble

Saltmakers House Hamble Point Marina School Lane
Hamble
SO31 4NB
United Kingdom
Le agradecemos que mencione que vio este barco en TheYachtMarket.
XXXX XXX XXX

Gracias

Su mensaje ha sido enviado.

Solicite más fotografías

Enviar correo electrónico a un amigo

Al enviar este formulario, usted acepta nuestras Políticas de Privacidad y de Cookies

Al enviar este formulario, usted acepta nuestras Políticas de Privacidad y de CookiesSitio protegido por reCAPTCHA
de Google. Rigen la Política de Privacidad y los Términos de Servicio

Informar de este barco

Muchas gracias. Su mensaje ha sido enviado

¿Por qué no registrar su interés en estos barcos similares?

Le enviaremos los siguientes datos a los vendedores de los barcos seleccionados: Su nombre, dirección de correo electrónicos, número de teléfono (si fue proporcionado), su país y en cuáles barcos está interesado.

Barco anteriorBarco siguiente

Cambiar las unidades de medida

Esta característica necesita cookies para estar habilitada en su buscador.

Mostrar precio en:

Mostrar esloras, manga y calado en:

Mostrar desplazamiento o peso en:

Mostrar capacidad o volumen en:

Mostrar velocidad en:

Mostrar distancia en: