Southerly 42RST (2009) Zu verkaufen in Preveza, Griechenland

£230.000 GBP
Steuer Bezahlt/enthaltenPreisangebot in Fremdwährung anfordern

KI-generierte Zusammenfassung

Die Southerly 42RST, die sich in Preveza, Griechenland, befindet, ist 12,86 Meter lang und 4,03 Meter breit. Dieses von Rob Humphreys entworfene und 2009 vom Stapel gelassene Schiff kombiniert einen schnellen, modernen Rumpf für hervorragende Leistung mit dem Komfort einer Hochseekreuzfahrt. Das Boot verfügt über ein geselliges Cockpit-Layout von Stephen Jones, ist aus hochbelastbarem GFK-Formteil gefertigt und verfügt über einen Schwenkkiel mit neuer Hebevorrichtung, die 2022 eingebaut wurde. Ausgestattet mit einem Yanmar 4JH5E 53 PS-Motor, umfangreichen Navigations- und Elektroniksystemen von Raymarine und verschiedenen Annehmlichkeiten wie Warmluftheizung und elektrischen Wassersystemen sorgt die Southerly 42RST für ein komfortables und leistungsfähiges Segelerlebnis. Dieses Schiff wurde 2020 und 2022 erheblich modernisiert, was es zu einer attraktiven Wahl für Segler macht, die Leistung und Zuverlässigkeit suchen.

Allgemeine Angaben
Fabrikat/Modell
Southerly 42RST
Kategorie
Used boot für verkauf
Steuer-/Mehrwertsteuerstatus
Bezahlt/enthalten
Bootsname
SOUTHERN COMFORT
Jahr
2009
Designer
Humphreys/Jones/Northshore
Gesamtlänge
12,86 meter
Länge auf Höhe der Wasserlinie
11,11 meter
Schiffsbreite
4,03 meter
Wasserverdrängung
11.250 kg
Kiel
Hubkiel
Standort
Preveza, Griechenland

Über diesen Bereich Southerly 42RST

English

Rob Humphreys was commissioned to design a fast, modern hull for good performance, with the stability and comfort for blue water cruising. The hull shape is a further development of Rob Humphreys long pedigree of Southerly hulls. The modern plumb stem increases waterline length, and a broad transom maintains volume aft, for performance and interior space. Deck styling and a sociable cockpit layout, designed by Stephen Jones, has created one of the most comfortable and easy to use sailing yachts available

Dimensions

Length overall    12.86M    42’ 2”
Length waterline    11.11M         36’ 5”
Beam                       4.03M        13’ 3”
Draft keel up            0.84M          2’ 9”
Draft keel down        2.72M        8’ 11”
Displacement       11,250kg     24,802lbs
Ballast weight         2,100kg      4,630lbs
Keel weight             1,570kg      3,461lbs
Total ballast             3,670kg     8,091lbs
Air draft                  18.73M        61’5”

Fuel tank                   299L        66 gal
Water tank                 269L        59 gal 
Holding tank                 60L       30 gal

Hull Construction

Heavy duty GRP moulding, hand laid up incorporating multi-axial and unidirectional reinforcement. The keel box is an integral part of the hull lay-up and sandwich construction stiffening runs the entire length of the hull topsides. All main bulkheads are bonded into the hull at main lay-up stage along with the stiffening grillage of transverse frames and longitudinal stringers. The engine bearers are also an integral part of the hull structure.
Topside gelcoat: Southerly Blue
Style lines: Ivory White
Boot top lines: Red & Ivory White
Underwater gelcoat: Clear

Deck Construction

Hand laid up GRP. Sandwich construction. Heavily stressed areas are additionally reinforced with unidirectional glass reinforcement. The deck is bonded to the hull through the entire length and to all main bulkheads, resulting in a strong and integrated unit. Teak capping rail to hull and deck joint upstand. Moulded two tone non-slip finish to ring deck. Access to chain locker from foredeck.
Gelcoat: Ivory White

Swing Keel

The fixed ballast is an iron casting which acts as a grounding plate and as a transverse stiffening for the keel unit. It is fitted into a recess in the hull in the area of the keel box with stainless steel bolts. The aerofoil Swing Keel is cast iron and incorporates a stainless steel pivot at the leading edge. The Swing Keel is raised and lowered by a hydraulic ram powered by an electrically driven pump with a hand operated back-up. All hydraulics and easily accessible for maintenance. A keel control and gauge showing keel position is fitted at the wheel pedestal. A removeable stainless steel pin can be positioned to enable to keel to be locked in the ‘up’ position. New keel pennant and lifting gear fitted 2022

Engine

Yanmar 4JH5E 53HP (39kW) 4 cylinder, fresh water cooled, diesel engine
Reduction/reverse gearbox, reconditioned 2022
80amp alternator
Bronze sterntube with water lubricated stern gland
Stainless steel propeller shaft
Bronze three bladed feathering propeller
Ambassador AM10 rope cutter fitted on prop shaft
Substantial skeg fitted on centreline to protect propeller and rudders when yachts is dried out
Non metallic fuel tank – Capacity 299 litres/66gallons, with sediment trap and line filter
Non metallic water strainer with removeable filter
12V electric ventilator
Sound deadening to engine box
Hinge up panels at either end of engine box for access
Engine box can be completely removed for maintenance

Bow Thruster

75Kg bow thruster with control mounted at helm

Electrics

12 Volt system
Four heavy duty batteries, charged from engine alternator. One for engine, three for domestic use (New in 2022)
Mastervolt battery charger 12/50 amp smart 3 step
Isolating switches
Cabin lighting throughout
Reading lights over bunks
Chart light over navigation table
Full navigation light system incorporating bow lights, stern light, masthead tricolour light with all round white anchor light, deck flood light and steaming light
Circuit breakers on main panel
12V interior socket (Cigarette lighter type) at nav station
240v ring main with four double outlet sockets, aft cabin, saloon, galley & forward cabin, earth leak circuit breaker and shore power connection lead with plug
1Kw immersion heater fitted to engine calorifier

Navigation and Electronics

Radar reflector fitted at mast
ST60 wind displays fitted to both helm positions
ST60 Tridata(Log/Depth/Speed) displays fitted to both helm positions
ST60 graphic display fitted above companionway hatch
Raymarine autopilot with mamba drive, st6002+ displays in cockpit, at aft end of cockpit table and at chart table, S2G corepack with internal rate gyro                                                                                                     
Raymarine RAY218E VHF radio with DSC function with aerial mounted at masthead, with external speaker, external haler horn/speaker, and RayMic 2nd station hand mike at aft end of cockpit table
2 x Raymarine C90W multifunction displays, one fitted in pod at chart table, the other fitted in swivelling Navpod at aft end of cockpit table
Raymarine Raystar 125 GPS Antenna
Raymarine 18” ethernet Raydome RD418D complete with Scanstrut mast bracket mounted on mast
Raymarine DSM300 digital sounder
Sony CDX HR9051P Radio/CD/MP3 player with two internal speakers
2 Waterproof cockpit speakers for radio/CD/MP3 player
20” LCD Flat screen TV with built in Freeview and DVD player (12V supply)
Glomax TV antenna mounted to masthead

Engineering

Hot air heating system with four outlets, aft cabin, saloon, galley/mid cabin, forward cabin, with 7 day timer/controller
Holding tank system for forward head compartment. 60L gravity drained tank. Heads pumps to tank or to sea, fitted with deck pump-out point

Water Systems and Pumps

Pressurised hot and cold water system
Mixer tap to galley sink
Aquafilta water filtration unit
Mixer tap in heads compartments
Deck shower with hot and cold water fitted to transom
Non-metallic freshwater tank – total capacity 269 litres/59 gallons
Electric pressure pump
Hot water provided by engine calorifier unit
Electric sump pumps to shower trays
One manual bilge pump
One electric submersible bilge pump (New 2024)

Steering

Semi-balanced twin rudders
Twin 30” stainless steel cockpit wheels
Hide covers to wheel rims
Lewmar/Whitlock Cobra steering system
Single lever engine control
Emergency steering system
Twin compass guards and 6” main steering compasses

Spars and Rigging

Selden fractional rig, with in-mast furling (New mast, sails and standing rigging August 2020)
Double swept back spreaders
Selden anodised aluminium spars, finished in silver
Furlex 300s furling system for headsail
Internal halyards
1 x 19 stainless steel wire standing rigging with swage toggle-fork rigging screws (New August 2020)
Backstay with manual tensioner
Self tacking foresail
Furlex headsail reefing system
Single line reefing led aft to cockpit for mainsail
Kicker with strong gas insert
Main halyard
Topping lift
Kicker, jib sheet, main halyard, topping lift, outhaul and 2 reefs lead aft
Jib halyard at mast
Burgee and signal halyards
Lewmar size 30 winch on mast
Mainsheet led aft port and starboard
Stainess steel removeable bowsprit

Sails

Vertically battened furling mainsail (Saunders Sails, new August 2020)
Furling self tacking Genoa with Karver furling gear (Saunders Sails. new August 2020)
Small spinnaker
Storm jib in dayglo orange
Storm tri-sail in dayglo orange

Cockpit

Aft Cockpit
Self draining
Laid teak to cockpit seats
Laid teak to cockpit sole
Cockpit table with folding leaves, stowage and handrail
Good access aft for boarding through transom
Telescopic stern boarding ladder
Large cockpit locker to port and starboard
Gas bottle stowage in cockpit locker to starboard with 2 gas bottles
Liferaft/fender cage to cockpit locker to port
Acrylic main hatch with washboard
Instrument panel above hatchway
Two winch handle pockets
Two safety harness eyes
Wheel covers in Dune 5026 canvas
Cockpit table cover in Dune 5026 canvas
Sprayhood in Dune 5026 canvas with grey pulling band and stainless steel frame
Cockpit enclosure in Dune 5026 canvas with stainless steel frame (New in 2022)
Fitted cockpit cushions (New in 2022)
Spray hood
Complete cockpit tent (new 2022)

Deck fittings and Loose Gear

Cleats forward and aft raised
Spring cleats amidships with stainless steel chafe guards
Stainless steel stemhead fitting with twin bow roller
GRP foredeck anchor locker with reinforced shelf to take anchor windlass
Quick Hector 1500w electric windlass, with hand held remote control and chain counter, with additional control switch mounted at port helm
Stainless steel pulpit incorporating navigation light bracket
Stainless steel stanchions and guardwires with gates port and starboard
Stainless steel pushpit incorporating stern gate, navigation light bracket and ensign socket
Fuel and water deck fillers
Self tacking foresail track with sheet to cockpit
Four rope clutches to port five to starboard for running rigging
Two Lewmar 46ST Winches at companionway, electric to starboard, manual to port
Two Lewmar 46ST manual sheet winches to cockpit coamings
Stainless steel grab handles on either side of coachroof with integral mainsheet lead
Recessed trough for sprayhood
25Kg Bruce anchor
50 Metres of 10mm chain
30 Metres of warp
Four fire extinguishers
One fire blanket
8 Fenders and tails
5 Mooring warps
2 Boat hooks
Ensign & flagstaff
PVC coated wire lifeline jackstays fitted and port and starboard
Teak pad for outboard engine stowage mounted to pushpit
Liferaft cradle fitted to pushpit
Ocean ISO 8 man hard cannister liferaft
2 x horseshoe lifebuoys, with lights, mounted to port and starboard pushpit rails
Jonbuoy inflatable DanBuoy fitted to pushpit

Windows, Hatches and Ventilation

Six Lewmar opening deck hatches, 1 x size 60 over forecabin, 1 x size 20 and 1 x size 30 over saloon, 1 x size 20 over chart table, 1 x size 00 over galley and 1 x size 00 over forwards heads.
Glazed opening port in aft cabin coaming starboard
Glazed opening port in aft heads coaming port
Glazed opening ports in aft cabin to cockpit table pod
Two dorade and one fixed ventilator on deck serving heads and saloon
Acrylic main companionway hatch
Pilot house windows and full ports are partially reflective toughened glass bonded into recesses in GRP moulding

Internal Joinery and Upholstery

Interior joinery is finished in solid timber and matching faced marine quality plywood. Linings are fabric covered plywood or GRP as appropriate. Cabin Soles are striped non-slip laminate.

Joinery – American Cherry
Galley Worktop – Gemini 
Heads Worktop – Gemini 
Saloon Upholstery – Parma Parm 106 Cosmos
Cabin Upholstery – Parma Parm 106 Cosmos
Navigators seat – Sunbury, faux range, Sandiego Blue 5801
Curtains – Jab, Oatmeal 1-1645-476
Concertina blinds to saloon coachroof windows – White 
Blinds in aft cabin – White 

Accommodation

The layout is in accordance with the general arrangement drawing. There are a total of seven berths with two in the forecabin, two in the aft cabin, two in the mid cabin and one in the saloon. (Two with the berth conversion)

Galley
Twin stainless steel sinks
Corian type work top 
Pressurised hot and cold water
Stainless steel grabrail
130L Front loading stainless steel refrigeration
Fully gimballed gas cooker with two burners, grill and oven, with fail-safe devises on all burners
Gas cut off tap
Ample storage for crockery and cutlery
Cupboards
Opening hatch
Fixed hull port
Overhead light

Raised saloon
Raised seating for eight people
Seating conversion to double berth, with infill cushion
Excellent vision
Adjustable folding leaf table
Stowage
Bookshelf
Two opening hatches
Roller shade/screens to hatches
Overhead lights


Navigation area
Chart table to starboard with excellent visibility
Seat
Instrument console pod forward of chart table
Chart stowage under hinged lid
Locker spaces
Opening hatch
Roller shade/screen to hatch
Overhead lights
Chart light
Main switch panel
inverter
Hanging locker aft

Aft Cabin
Large centreline double berth
Upholstered seats port and starboard
Two corner lockers
Large hanging locker
Shelf
Three opening portlights
Opening hatch
Two fixed portlights
Overhead lights
Two reading lights
Access to steering gear

Aft Cabin En-suite
Electric marine WC (reconditioned 2024)
Washbasin with Corian type surround
Hot and cold pressurised water
Electrical shower pump
Grating to shower tray
Lockers
Mirror
Glass holder
Fixed portlight
Opening portlight

Forecabin
‘V’berth, two long single berths
Infill to convert to a double
Large hanging locker
Large shelved locker
Two full lengths shelves
Two fixed portlights
Opening hatch
Roller shade/screen to hatch
Overhead lights
Two reading lights
Curtains

Forwards Heads
Electric marine WC (new 2024)
Washbasin with Corian type surround
Hot and cold pressurised water
Grating to shower tray
Electric shower pump
Opening hatch
Fixed portlight
Lockers
Mirror
Glass holder
Ventilation

Portside Mid cabin 
Two bunk berths with lee cloths
Stowage locker with hanging space
Fixed portlight
Access door to under saloon seating storage

The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.

Mehr lesen

Motor
1 x Yanmar 4JH5E
Kraftstoff
Diesel
Kraftstoffkapazität
299 liter

The company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information not warrant the condition if the vessel. A buyer shoudl instruct his agents, or his surveyors, to invstigate such details as trhe buyer desires validated. The vessel is offered subject to prior sale, price change, or withdrawal without notice.

Dieser Southerly 42RST wurde 651 Mal angesehen
Händler Informationen

Northshore Shipyard Ltd.

Itchenor Shipyard
Itchenor, Chichester
West Sussex
PO20 7AY
United Kingdom
Erwähnen Sie, dass Sie dieses Boot auf TheYachtMarket gefunden haben.
XXXX XXX XXX
ABYA Logo
ABYA YACHTHÄNDLER

Maßstäbe setzen In der Yachtvermittlung und -förderung seit 1912

Finde mehr heraus

Vielen Dank

Ihre Nachricht wurde gesendet.

Weitere Fotos anfordern

E-Mail an einen Freund/eine Freundin senden

Durch Abschicken dieses Formulars stimmen Sie unserer Datenschutz- und Cookie-Richtlinie zu

Durch Abschicken dieses Formulars stimmen Sie unserer Datenschutz- und Cookie-Richtlinie zuDiese Seite wird geschützt durch Google reCAPTCHA.
Es gelten die zugehörige(n) Datenschutzrichtlinie und Nutzungsbedingungen

Dieses Boot melden

Ihre Nachricht wurde erfolgreich gesendet

Warum nicht Interesse an diesen ähnlichen Booten bekunden?

Wir senden folgende Daten an die Verkäufer der ausgewählten Boote: Ihren Namen, Ihre E-Mail-Adresse, Ihre Telefonnummer (falls angegeben), Ihr Land und an welchem Boot bzw. welchen Booten Sie interessiert sind.

Weitere Informationen anfordern

Vorheriges BootNächstes Boot

Maßeinheiten ändern

Für diese Funktion müssen Cookies in Ihrem Browser aktiviert sein.

Preis anzeigen in:

Länge, Breite und Tiefgang anzeigen in:

Wasserverdrängung oder Gewicht anzeigen in:

Kapazität oder Volumen zeigen in:

Geschwindigkeit anzeigen in:

Reichweite anzeigen in: