Construction and Mechanics
Construction
Design made following European Directive requirements and according to EC certification
Monolithic hull design in polyester
Monolithic structural counter moulding laminated and bonded to the hull
Deck in balsa and glass fibre sandwich covered in «diamond point» type non-slip surface
Deck hull join screwed, stuck and banded with 1 solid wood bulwark
Cast iron keel fixed with bolts and stainless steel backing plates
Hung rudder with stainless steel stock
White coloured hull - Hull decorated in pearl grey
Mechincals
Engine
Yanmar 3 JH4E 3 Cylinder inboard Diesel.
Sea and fresh water cooled
3 Bladed bronze fixed prop on a shaft drive.
Serviced every years
Bow90 Vetus Bow Thruster with independent battery fitted 2018
Electrics
12 volt system with 3 batteries. 1x engine 2x domestics.
Charged via Shore power charger and engine.
Full 220 volt Shore power system with cable.
Water System
Pressurized hot and cold water system
Water heater through shore power and engine.
Cockpit shower
Tankage
360 litres water tank
200 litres Diesel tank
80 litres Holding tank for aft heads (currently bypassed)
Mast Rigging and Sails, Accommodation
Mast and Rigging
Standard mast 9/10 electro-polished aluminium installed on the deck,
2 levels of advanced cross trees
Anodised aluminium boom
Discontinuous stainless steel standing rigging
2 Backstays with turnbuckles
Rigid kicking strap with tackle
Genoa furling system with drum on the deck
Mainsail sheet track
2 genoa tracks with piston adjusted traveller cars - 2 Genoa sheet return blocks
Rigging run back to cockpit (except boom topping lift)
Complete running rigging: Main halyard, genoa halyard with clutch on mast and cleat, Boom topping lift with cleat on mast, Mainsheet, 2 Genoa sheets
2 fast reefing ropes, 1 manual reef
Mainsail topping lift lead to cockpit
8 Jammers
6 Jamming cleats
Winches
• 2 Self-tailing genoa sheet winches (H46.2 STC)
• 1 Self tailing coachroof winches (H40.2 STC)
• 1 Self tailing coachroof winches (H40.2 STC) Electric Halyard winch fitted 2018
• 2 Winch handles aluminium
• 2 Winch handle boxes
Sails
Semi Battened Main March 2015 by Arun
Furling Genoa March 2015 By Arun
Original Factory Sails still available. Main and Genoa
Asymmetric Spinnaker
Storm Jib.
Rig and Sails Dims
Mainsail (classic) 38.50 m²
Genoa (140 %) 39.90 m²
I 15.00 m
J 3.95 m
P 14.02 m
E 4.80 m
Accommodation
Version 1 Forward cabin - 1 Toilet, 2 Aft cabins- 1 Toilet
Forward cabin
Headroom: 1.87 m
Central double bed (2.00 m x 1.75 m x 0.44 m) - Marine mattress
Hanging locker - Glove box - Cubby hole locker - Storage drawer - Locker
storage
2 Opening hatches with blind / Mosquito net
2 Hull portholes with curtain
Forward Cabin Heads
Headroom: 1.89 m
Access through forward cabin
Washroom moulded in one piece to be watertight
Manual marine toilet
Washbasin - shower mixer tap hot / cold water
1 Mirror
Toilet accessories: Glass holder - Towel rail - Bin - Paper dispenser
Cupboard and cubby hole
1 Opening deck hatch with shutter / Mosquito net
Galley
Headroom: 1.93 m
Kitchen along the hull
White laminated worktop
1 Stainless steel sink 2 rectangular basins Stainless steel - 1 Mixer tap cold
water / hot under pressure
1 Gas cooker 2 hobs - stainless steel oven and grill replaced 2016, on mountings - 1 Stainless steel protection handrail
1 x 170 liter ice box, top opening 12 V Refrigeration unit
Fitted cupboards and closed cubbyholes (Shelf Bin - tea towel holder)
1 cutlery drawer
Cubbyhole with stainless steel beading
1 Hull porthole with curtain
1 Fixed deck house side window with concertina blind
1 Porthole opening onto coamimg in side window
CHART TABLE TO PORT
Table with flap - Glove box - Storage - Shelf- Moulded wood beading
Helmsman seat with cushion
Pivoting electrical panel enabling access to electrical connections
Navigation instrument panel (without instruments)
1 White light fitting / Red
1 Porthole opening onto coamimg in side window
Saloon
Headroom: 1.95 m
U shaped saloon bench - double density foam
Central bench seat with storage locker.
4 Matching decorative cushions
Saloon table in only 1 piece Varnished wooden top - veneering - Aluminium
legs
1 Stainless steel handrail on aft washroom partition
Cubby hole lockers - Storage space along the hull - Storage under bench seat
Starboard Aft Heads
Head compartment is a one-piece moulding for good water-tightness and easy maintenance.
Access through saloon and aft starboard cabin.
Large bowl manual marine toilet
1 x 80 L rigid holding tank as standard.
Worktop with washbasin and wood handrail.
Hot / cold water mixer tap.
2 closed shelves.
1 double mirror.
1 locker beneath washbasin with waste bin and paper holder.
1 towel holder on entrance door.
1 glass holder.
1 fixed side window with 1 opening port (300 x 120) in coaming and 1 curtain.
3 halogen deckhead lights, 1 switch.
Aft Cabins
Headroom: 1.90 m approx.
1 double berth 2.10 m x 1.50 m with high-density foam mattress for greater comfort.
2 closed shelves along the hull.
1 stowage locker.
1 hanging locker with 2 shelves.
1 benchseat/side table for access to berth
Opening and Lighting
1 fixed hull port with curtain.
1 opening port (300 x 120) in coaming.
1 port to cockpit (300 x 120).
1 opening deck hatch (260 x 260) with blind / mosquito screen.
3 halogen deckhead lights with integral switches.
Interior
Woodwork Alpi Mahogany
Parquet type laminated floors
Cloth hull spar ceilings in saloon and cabins
Blue Fabric upholstery
Companionway
Headroom: 1.90 m Wooden saloon companionway with moulded wood hanging steps with nonslip
surface
2 Stainless steel handrails
Heating
Webasto Airtop with 6 outlets