Elan 333 classic and extremely well respected cruiser/racer, quick around the cans and easy to handle with comfortable family accommodation below. HARAKA has been well maintained and updated over the years with her current ownership, updates include: standing rigging 2014, hull stripped back, new calorifier hoses, fuel pump, new exhaust elbow, new seacocks, new sea-water filter, removable solar panels, various Navigation equipment and electrics upgrades. Lying ashore at Blackness Marine Devon.
MORE PHOTOS TO FOLLOW SHORTLY . . . . . . . . .
SPECIFICATION:
Elan 333 designed by Rob Humphreys and built by Elan Yachts, Slovenia
Fractional sloop rig
Fin keel
Spade hung rudder
Wheel steering with direct linkage
GRP white, hull, deck and superstructure
Teak laid decking in cockpit, seats and cockpit sole.
Aft cockpit
Stainless steel tubing grab rails
Stainless steel tubing pushpit and pulpit
Bathing platform and ladder
ENGINE:
Yanmar 2GM20 18 Hp 2-cylinder diesel engine (2001)
Last Serviced April 2024
Engine hours 1114
Shaft/fixed 3 blade propeller (replacement) with original 2 blade folding propeller available
Cruise speed 6 knots
Max speed 7 knots
Fuel consumption 1.5 litres per hour
Range 250 Nm
ELECTRICS:
2 x 12-volt batteries charged by engine alternator
71 A/Hr Engine, 100 A/Hr Service
Onboard 240V a/c shore power battery charger
240V a/c shore power connections
Solar panels 100W removable
TANKAGE:
Fuel - 65 litres – Stainless steel
Water - 90 litres – Stainless steel
RIG:
Fractional sloop rig, anodised double spreader mast and boom
Standing rigging S/S age 10 years – (New 2014)
Mainsail Slab reefing x 3 points
Headsail roller reefing
Spinnaker gear pole
WINCHES:
2 x Lewmar main/Halyard winches - Coachroof
2 x Lewmar gib sheet winches – Cockpit
SAILS:
Mainsail fully battened - 10+ years - Sanders
Genoa 150% non-furling - 10+ years (not used for 10 years) - Sanders
Furling tri radial Jib 138% - 10+ years (not used for 10 years) - Sanders
Furling Jib 105% - 10+ years (UV strip replaced) - Sanders
Spinnaker - 10+ years (not used for 10 years) - Sanders
Sail report from 2013, “Well maintained and lightly used, all in fair and serviceable condition, Main and Jib great all-round balance for cruising”
ACCOMMODATION:
7 berths in 2 cabins comprising 3 doubles and 1 single
The aft and forward cabins have DRY-Mat condensation dispersing layers under mattresses
Mahogany interior wood finish below with blue and white motif patterned upholstery
Saloon area with port and starboard banquettes style seating around saloon table for 8 persons
Forward facing navigation chart table
Galley area with 11/2 sink unit with electric pressurized hot and cold water supply (the tap unit drips and needs attention), gas cooker with two ring hob, separate oven and grill, 12-volt fridge
Heads compartment with Marine heads, shower and hand basin with hot and cold water supply.
(Heads anti-odour kit on board ready to be fitted)
Diesel powered Eberspacher hot air heating
The aft and forward cabins have slated air dispersing layers under mattresses
INVENTORY
NAVIGATION:
Compass
VHF radio - B&G V60B combined AIS/VHF (New 2021)
Depth sounder - Raymarine
Log/speed - Raymarine
GPS - Vesper SP160 (New 2021)
Chart plotter - B&G 9 FS 9-inch display (New 2021)
Radar reflector onboard
Auto pilot - Raymarine ST 4000+
Converter kit - Raymarine Sea Talk ST1 STNG which fully links NM0183 to NM2000 standards (New 2021)
Navtex
GENERAL EQUIPMENT:
Anchors 2 x Bruce 15kg and 7.5kg
Chain/warp - 24 metres new DIN766 8mm x 10 m octoplat warp
Windlass - No windlass fitted but platform in anchor locker for simple installation
Life raft x 1
Life buoy x 2
Danbuoy - new flag purchased but needs fitting
Life jackets x 2
EPIRB – unused
Fire extinguishers x 3
Gas detector - needs updating
Fog horn - needs connecting to VHF terminals
Bilge pump manual x 1 with lever/socket in cockpit
Bilge pump electric with auto switch
Radio/CD – radio/cassette
Clock
Barometer
Sun shade - loose sheet to shade cockpit
Dinghy - Bombardier inflatable
Electric outboard - Torqeedo 1003 CS on board
Two-stroke outboard - Mercury 2.5hp available if required
Boarding ladder
Fenders x 4
Warps - various
Boathook – extendable aluminium
Engine spares - some water pumps impellers, gaskets, etc
Comprehensive set of basic tools
VESSEL’S HISTORY/ USAGE:
The seller has owned HARAKA for ten and a half years and prior to this, she has only had two previous owners.
HARAKA has not been raced during this current ownership only used for irregular family and friends cruising a few days a year.
HARAKA was resident in St Malo, Brittany for four years prior to Brexit.
SERVICE HISTORY/RECENT IMPROVEMENTS:
2024 - A couple of control panels switches were replaced.
2023 - New calorifier hoses, fuel pump, radiator cap
2022 - New exhaust elbow fitted
2021 - Bronze seacocks were replaced with DZR as they don’t use bronze in France.
2021 - Electrical equipment was augmented and fully functioning.
2021 - Depth transducer was replaced.
2014 - Hull was cleaned back to zero in 2014.
2014 - Standing rigging replaced
Annually - Since the work in 2021 the seacocks have been serviced every year.
Annually - Since the hull work in 2014 the hull has been anti-fouled each year.
Annually - The engine has been professionally serviced every year:
Biannually - The sails were serviced every other year, ropes/running rigging washed about every other year last
washed winter of 2023/2024 and not used since.
REASON FOR SELLING:
Old and tired!
I have had lots of fun solo sailing and with friends and family but regrettably I’m no longer fit enough to handle her.
Very mixed feelings!
OWNER’S ADDITIONAL COMMENTS:
What a great Rob Humphreys design for the average to expert sailor alike.
Can do anything coastal and/or cross channel – but not so much creek-crawling due to the deep draft.
HARAKA has always felt comfortable and safe to sail, with a great turn of speed on a beam reach, and she has ridden out some tough weather/seas with ease.
Disclaimer:
Whilst every care has been taken in the preparation of these details their accuracy is not guaranteed and they are intended as a guide only and do not constitute a contract. A prospective buyer is strongly advised to employ a qualified Marine surveyor to carry out a survey of the vessel which should include an engine assessment where appropriate. Baltic Yacht Brokerage are acting as a Broker for the Vendor of this vessel, who unless otherwise stated, is not selling in the course of any business.