Cornish Crabbers 26 (2010) te koop in Famouth, Cornwall, Verenigd Koninkrijk

£92.500 GBP
Belastingen Betaald / inclusiefVraag een valuta-offerte aan

Door AI gegenereerde samenvatting

De Cornish Crabber 26, gelegen in Falmouth, Cornwall, is een model uit 2010 met een totale lengte van 7,92 meter. Dit klassieke gaffelkotterschip heeft onlangs een grondige refit ondergaan op de werf van Cornish Crabbers, inclusief een nieuwe mast, tuigage, zeilen in 2024 en een motorrevisie in 2023. De boot heeft een traditionele crème- en donkerblauwe kleurstelling, een ondiepe diepgangshefplaat en royale binnenruimte. Uitgerust met moderne voorzieningen zoals een kleurenplotter, verwarming, warm en koud water, het omvat ook een zoetwatertank, gereviseerde Yanmar 3YM20-motor en nieuwe accu's vanaf 2024. Compleet met nieuwe zeilsets belooft de Crabber 26 uitstekende zeileigenschappen gecombineerd met een duurzame stijl.

Algemene informatie
Merk/model
Cornish Crabbers 26
Categorie
Used boot voor verkoop
Prijs
Opmerking over prijs
Tax Paid
Belasting-/BTW-status
Betaald / inclusief
Jaar
2010
Lengte - totaal
7,92 meters
Romp
Glass Reinforced Plastic hull
Kiel
Midzwaard
Locatie
Famouth, Cornwall, Verenigd Koninkrijk

Meer info Cornish Crabbers 26

English

The Cornish Crabber 26 with traditional Gaff Cutter rig has recently undergone a substantial refit at Cornish Crabbers yard in Cornwall - please see inventory for full list of works.
Her classic lines cleverly give a combination of volume and internal headroom, and the clever lifting plate give a shallow draft when needed or kindly sea keeping qualities.
Classic cream and dark blue band livery built in 2010, she has many extras including colour plotter, heating, hot & cold water, new mast, rigging, sails, hoist wire, plumbing and much more.

Currently afloat at Premier Marina Falmouth, please do call or email for further information or to arrange a viewing.

Rig

Cutter

Deck stepped cutter rigged gaff

Laminated Sitka Spruce mast and spars (2024)

Stainless steel mast head cap and spreader band

Stainless steel gooseneck fitting and stainless steel bands to secure kicker and mainsheet to boom Stainless steel pivoting foot fitting on bowsprit with stainless steel end cap

Stainless steel gaff collar with rubber protection on bearing surface

Standing rigging (2024) of Dyform stainless steel wire with roll swaged terminal with stainless steel rigging screws

Harken furlers for jib and staysail

Running rigging in braid on braid rope (2024) All lines lead aft to cockpit

WINCHES

Primary Winches – 2x Lewmar 8, single speed.

Cockpit Halyard Winches – 2x Lewmar 16, two-speed, self-tailing

Electric Winch Handle – Winchrite rechargeable wind handle with companionway mounting

SAILS

Sails (two suits one brand new and unused)

Mainsail (2024) – Tan Dacron, 3 reefing points with tie in lacings. Luff and gaff lacings as required

Jib (2024) – Tan Dacron. Wire luff and tell tails

Staysail (2024) – Tan Dacron. Wire luff and tell tails

Mainsail – Cream Dacron, 3 reefing points with tie in lacings. Luff and gaff lacings as required

Jib – Cream Dacron. Wire luff and tell tails

Staysail – Cream Dacron. Wire luff and tell tails

Canvas Work

Mainsail cover Sprayhood

NAVIGATION AIDS

On deck: Depth/Speed/Log – Raymarine ST60+ Tri-Data Wind – Raymarine ST60

On deck: Plotter – Garmin GPSMap 556 Magnetic Compass

DSC VHF – Garmin VHF100i

Raymarine ST2000+ tiller pilot

INVENTORY

Single stainless steel bow roller with anchor self-stowing in roller.

Toerail mounted mooring cleats forward, midships and aft

Deck mounted alloy stanchions supporting double tier guardwires

Below deck level, self draining anchor locker with windlass mounted in lockers

Deck mounted stainless steel samson post located centrally on foredeck Stainless steel mast tabernacle

Lines lead aft from mast on port and starboard sides of coachroof Genoa track and cars mounted on toerail outboard of side decks Staysail track and cars mounted on inboard edge of side decks Hardwood grabrails running down coachroof port and starboard.

Moulded cockpit coamings.

Bench seating on port and starboard sides of cockpit

Cockpit lockers beneath port and starboard cockpit seats. Gas locker beneath central section of seating aft.

Halyard locker beneath step at companionway.

Selection of mooring warps

Selection of fenders.

SAFTEY EQUIPMENT

Navigation lights

Steaming light

Low level running lights

Horseshoe lifebuoy with light

Yanmar 3YM20 marine diesel engine 19hp

Two cylinder, naturally aspirated, indirectly cooled

Mechanical reversing marine gearbox

Single lever morse control

Engine last serviced 2024

Engine recondition, cutlass bearing, stern tube 2023

Propulsion & Steering:

25mm stainless steel prop shaft Flexible drive coupling

Driess type, lip seal stern gland

3 blade bronze prop

Oak tiller

Transom hung rudder

GROUND TACKLE

Bower Anchor –anchor on chain and rope rode.

Electric Anchor Windlass – 12VDC windlass, mounted in chain locker with foot button deck switches. Selection of mooring warps

ELECTRICS

Voltage systems:

12VDC onboard power system

Battery Bank 1 – 1x 12VDC lead acid (2024) Battery Bank 2 – 1x 12VDC lead acid (2024)

12VDC alternator charging battery banks

Battery Monitor: Merlin Smart gauge battery monitor

Fresh Water

Pressurised hot and cold water system Mixer tap in galley

Mixer tap/shower fitting in heads

Hot water provided from engine heated calorifier

Bilge Pumps

Manual bilge pump

Electric bilge pump with manual and auto switching TANKAGE

Fuel

Single diesel tank Rotomoulded plastic tank

Inspection tank in hatch for cleaning Approximate total capacity 60ltrs

Fresh Water

Single fresh water tank.

Stainless steel tank

Approximate capacity 250ltr

Tank fitted with inspection hatch or cleaning

Holding Tank

Single plastic holding tank.

Discharging overboard or via deck suction outlet

CRABBER 26, built in 2010

Designed by David Thomas and built by Cornish Crabbers UK

Recent overhaul / refit at Crabbers yard in Wadebridge. Main items listed below;

•a new rig (mast, gaff, boom, running and standing rigging, lights, wiring, aerial)

•new tan sails (unused along with a good set of used white sails)

•a completely refurbished and repainted interior with new LED lighting

•new upholstery

•components (from bow ring to stanchions) replaced

•engine recondition, new cutlass bearing, new stern tube, new batteries

•new anchor chain and warp

•new centerplate hoist wire

•new solar panel

•new plumbing, heads tap, galley tap

CONSTRUCTION

Single piece GRP moulded hull

Simulation moulded planking effect

Monolythic laminate, hand consolidated in mould

Integral moulded casing for centreplate, part of hull structure

Moulded internal structural liner forming base of furniture units and incorporating engine beds

Plywood bulkheads bonded to hull and deck

Original off-white gelcoat with blue gelcoat sheerband to finish topsides

Teak rubbing strake below sheerband.

Underwater hull finished with Copper Coat.

DECK & SUPERSTRUCTURE

Single piece moulded deck incorportating superstructure and self draining cockpit. Hand consolidated, sandwich construction with balsa core

Hardwood backing pads fitted in way of high load fittings

GRP moulded toerail with freeing ports running the length of the deck edge

Moulded non-slip panels to finished, decks, coachroof and cockpit

Cockpit locker hatches moulded in GRP with balsa core

Cockpit drain tubes are of moulded GRP tubes, glassed to hull and deck

Centreplate & Rudder:

Galvanised steel centreplate secured withing GRP moulded casing

Centreplate lifted and lowered by wire lead aft to deck purchase system on coachroof leading to cockpit winch.

3 cast lead ballast ingots form saloon sole, bonded and glassed to hull GRP rudder with foam core

Rudder hung on two stainless steel ‘pintle & guden hangings Lower weight bearing rudder shoe secured to hull skeg

Displacement: 4000 kg*

Ballast: 1722 kg* Builder: Cornish Crabbers Ltd (UK) Designer: David Thomas

Length Over All: 7.99 m*

Length Waterline: 7.24m*

Draught: 0.8 m- 2.0m*

Beam: 2.76 m*

Engine: Yanmar 3YM20 (June 2010)

Serial Number # 509871

ALL FIGURES ARE APPROXIMATE

Lees meer

Aandrijving
Motor
Yanmar 3YM20 (Sail Drive)
Aanvullende accommodatiegegevens
SLEEPS 4 IN FORWARD CABIN AND TWO SINGLE BERTHS IN SALOON

Forward Cabin

Two single berths forward with standing room between berths aft. Infill section to create double berth

Coolbox mounted on shelf centrally aft and strapped in place

Water tank beneath bunk.

Saloon

Bench settees port and starboard

Settee backrest hinge up to increase width when converted to two single berths. Drop leaf saloon table centrally built around centreboard box

Shelves outboard of settee backs port and starboard Ships switch panel outboard of starboard settee at aft end Lockers beneath settee bases

Galley

L-shaped galley to starboard of companionway Stainless steel sink forward inboard.

Top loading pantry locker below worktop outboard of sink forward. Gimbal mounted cooker outboard aft

Locker space beneath and outboard of worktopGalley

Galley Stove – Plastimo Neptune 2500 two burner, oven and grill, gimbal mounted.

Fridge – Waeco 12VDC coolbox style fridge, mounted in forepeak

Stainless steel sink mixer tap

Heads

Separate heads compartment to port side of companionway Forward facing manual marine toilet located inboard, aft.

Moulded counter top running along outboard side of compartment with inset wash hand basin mounted in countertop forward, fiddled shelf aft.

Jabsco manual marine toilet Stainless steel wash hand basin Mixer tap/shower fitting

Teak grating with shower tray sump below

Heating

Eberspacher diesel fired blown air heating system Outlet in saloon

Thermostatic cabin controller

Lighting

Overhead lighting throughout the interior. Bulkhead mounted reading lights in saloon LED blubs throughout

Accomodation Finish

All cabin furniture joinery work finished in an off-white paint with varnished hardwood trims Soleboards of plywood with a traditional teak and holly style veneer to finish

Hull sides lined with hardwood strip planking in a varnished finish Headlinings of foam backed vinyl.

Deze Cornish Crabbers 26 is 453 keer bekeken
Makelaar/dealer Informatie

Ancasta Falmouth

Falmouth Yacht Marina, North Parade
Falmouth
Cornwall
TR11 2TD
United Kingdom
Geef alstublieft aan dat u deze boot op TheYachtMarket hebt gezien.
XXXX XXX XXX
ABYA Logo
ABYA JACHTMAKELAAR

Bepaalt de normen op het gebied van jachtmakelaardij en verkoopakten sinds 1912

Meer informatie

Hartelijk dank

Uw bericht is verzonden.

Verzoek meer foto's

E-mail naar een vriend

Door dit formulier in te dienen, gaat u akkoord met ons privacy- en cookiebeleid

Door dit formulier in te dienen, gaat u akkoord met ons privacy- en cookiebeleidSite wordt beschermd door het privacybeleid van Google reCAPTCHA en de voorwaarden zijn van toepassing

Rapporteer deze boot

Dank u, uw bericht is verstuurd

Waarom zou u niet uw interesse in deze gelijksoortige boten registreren?

We sturen de volgende gegevens naar de verkopers van de geselecteerde boten: Uw naam, e-mailadres, telefoonnummer (indien gegeven), uw land en in welke boot/boten u geïnteresseerd bent.

Eenheden of maten wijzigen

Voor deze functie moeten de cookies in uw bladerprogramma ingeschakeld zijn.

Prijs weergeven in:

Lengte, breedte en diepgang weergeven in:

Verplaatsing of gewicht weergeven in:

Capaciteit of volume weergeven in:

Snelheid weergeven in:

Afstand weergeven in: