Enregistrer Partager Identifiant du bateau: 2769710

Catalina 36 MkII (1998) à vendre dans Port Charlotte, Floride, États-Unis

£39 355 GBP
Prix répertoriés $49 900 USDObtenir un devis en devises étrangères

Résumé généré par l'IA

Le Catalina 36 MkII de 1998, situé à Port Charlotte, aux États-Unis, est conçu pour la croisière et la course avec une longueur de 10,97 mètres. Ce modèle est livré avec plusieurs améliorations, notamment des rails de foc réglables pour une forme de voile optimale, un système de hale-bas de spinnaker et une hélice repliable pour une efficacité de navigation accrue. Il est doté d'un guindeau avec rangement sous le pont, d'un taud de soleil avec fenêtres en isinglass et d'un bimini de cockpit. Des instruments de navigation essentiels tels que les systèmes de profondeur et GPS Garmin, le pilote automatique Raymarine et un vaste tableau de bord sont inclus. L'intérieur bénéficie d'un design ouvert avec une cuisine en L, un salon avec six places assises, une couchette en V et une cabine arrière avec une trappe d'évacuation. Le moteur est un Universal d'origine bien entretenu, soutenu par une batterie lithium-phosphate fiable avec des capacités de charge solaire. Un confort supplémentaire provient d'un système de climatisation récemment mis à niveau et d'un système de chauffage polyvalent pour l'eau chaude. Les dispositifs de sécurité comprennent une radio VHF avec DSC et AIS, ainsi qu'un équipement d'urgence comme des gilets de sauvetage et un extincteur.

Informations générales
Marque/modèle
Catalina 36 MkII
Catégorie
Used bateau pour vente
Prix
£39 355 GBP | Prix répertoriés $49 900 USDObtenir un devis en devises étrangères
Année
1998
Longueur totale
10,97 mètres
Emplacement
Port Charlotte, Floride, États-Unis

À propos de Catalina 36 MkII

English

This Catalina MkII is the high performance model that has a few add ons for racing. One of the additional options are jib tracks that are adjustable under load with lines from the cockpit. This tweaking of the jib sheeting angle can be used to get the proper jib shape when reefing the jib by moving the car forward without having to luff the sail, test, luff and test until the right shape is acquired. There is also a downhaul guy for a spinnaker installed with a line led back to the cockpit. This rig is set up with a rigid vang used to improve sail shape but also to support the boom from falling should the topping lift break. The prop has also been changed out with a folding prop for additional sailing efficiency and to avoid wrapping the prop in crab trap lines.

Features common with the production 36 MKII vessels include:

Windless with under-deck storage locker that opens for cleaning and a drain to the sea for water coming off the chain or line when stowed.

Wire exposed life lines for easy inspection to ensure no corrosion goes undetected for confidence it will keep sailors aboard when relied upon.

Dodger with Isinglass windows for good visibility and an opening center section for fresh air when conditions are kindly

Cockpit Bimini for protection from the sun and comfortable sailing. 

Large wheel to allow seating on the sides for visibility of the jib sail as well as fine adjustments to course.

Full instrument cluster at the helm with Garmin Depth, speed, wind angle and speed, Ray Marine auto pilot control and a Garmin GPS Map and a large lighted compass. The autopilot is under deck which is well protected from the sun and water while operating much quieter than the wheel integrated versions. The instrument cluster for the Engine is located below the wheel at the helm to read temperature, oil pressure, RPM, etc as well as starting and stopping the engine.

The cockpit has a removable helm seat to allow access to the swim platform. The floor is open to allow water to drain quickly out toward the swim platform in the event of a wave landing in the cockpit which I have not experienced, but appreciate should it ever happen.

The swim platform is a great safety aspect when presented with a man overboard situation where giving support to the swimmer is much easier than raised cockpits. This is also extremely handy when bringing people and supplies aboard from a dinghy.

There are a set of davits for a dinghy that house a couple of solar panels that keep the batteries up without needing shore power. There is also an engine hoist for lifting an outboard from the dinghy as well as an Edson mount on the rail to store the outboard.

All hand grips are stainless steel for reduced maintenance under the sun and elements. There are hand grips on the deck along the top of the saloon as well as those on the dodger for a good grip when moving forward.

The motor is a Universal that is original to the boat. It has excellent access although front access requires the steps and a cover be moved. Once opened up though all points of the motor are easily accessible. The stuffing box aft of the transmission on the shaft is also easily accessed from the rear cabin. There is no need to be a contortionist and climb under or behind some bulkhead to service. There is a water separator and separate engine oil filter for ensuring the fuel is clean that is accessed in that same area. The engine is started off a single Relion Lithium Phosphate bank of two batteries (also the house bank). There is a battery switch that can be used to separate them if desired. There is also a battery monitor to see the state of charge and the solar charge controller is a Victron with bluetooth monitoring so you can check the status and history via a smart phone app. There is also an extra raw water pump that is an upgrade from the original. The upgrade allows the impeller to be replaced without disconnecting the water jacket in the original layout. This adaptation is designed for this motor.

There is a VHF radio with DSC for emergency location broadcast and AIS receiver built in for alarms. The electronics for speed, wind, depth, and AIS etc are connected via a NMEA2000 with the help of the Garmin Chart Plotter where necessary. There is also a radar unit connected to the back stay to avoid fouling the jib when tacking. 

There are 3 sails that include the main, jib and genoa. The head sails are both roller furling and the main is adapted for the Dutchman reefing system. There is a sail cover with cutouts to accommodate the dutchman lines and together they allow for controlled dropping of the main sail. The main has two reefing points with lines led to the cockpit for reefing from a safer/dryer location. There is an adjustable outhaul that is also led back to the cockpit as well. There is an adjustable pole for downwind work that is mounted to the front of the mast with control lines to easily drop it into place for use and retract it back out of the way when finished.

The interior layout includes an open plan with an L shaped galley. The galley includes a top loading refrigeration compartment, gimballed propane stove and oven, microwave, with cabinets and a top loading storage locker for bulk dry food storage. There is a foot pump for emptying water from the bottom of the refrigeration compartment when needed and there is pressure water at the double sink that faces forward into the saloon. There are also several drawers for utensils and a garbage bin. Above the oven and slightly aft is an overhead opening port for ventilation that is inside the dodger to keep dry in foul weather. The recently installed (2022) replacement air conditioning keeps the interior cool and comfortable on those hot days and nights at a dock. 

The water tank has a feed that goes through a water heater that can operate on 110v AC when at the dock and it can be cycled through the engine for hot water when anchored out. There is a spare, brand new, hot water heater because the manufacturer received a lot with models that match those of this boat so it can be replaced when needed without having to search for something of similar dimensions.

The head has a manual pump and is a wet head with a shower curtain to keep the counter and cabinet dry during a shower. There is also a fiberglass molded seat in the shower to rest on either during a shower while under way or for dressing. The head has a private door to the v-berth state room and a separate door into the saloon. There is a macerator and a holding tank that meet coast guard requirements for handling waste. There is also a sump pump for discharging shower water that is controlled from the head. 

The saloon has seating for 6 with two tables. One table drops down from the wall as the main dining table which can be dropped into position to support a double bed in the saloon. On the starboard side there are two seats with a small “card table” between that also drops down to make a long bench seat/single bed. Cabinet doors in the saloon are all louvered for ventilation and there is a chart table and drawers for towels and linens ets across from the head.

The forward v-berth state room has a hanging locker and drawers for personal belongings as well as a mirrored cabinet. It has a large opening hatch for air or as an escape hatch if ever needed and additional storage along the top walls surrounding the bed. 

The rear cabin has its own door for privacy and a double bed that runs athwart ship. This is a very stable place within the boat with an escape hatch above that leads into the cockpit. This can also allow ventilation and allow conversation with anyone at the helm if desired. This state room has a hanging locker and several drawers for personal effects and a small ventilation hatch forward that opens under the dodger for air safe from foul weather in most points of sail.

All rooms have 12v variable speed fans and ample lighting for reading or moving about the boat. All portlights have snap on covers to keep the boat cooler when on or make the boat feel open and airy when removed.

The vessel comes complete with life preservers and a fire extinguisher. 

Call Bud Mueller to set up an appointment to see this ready to cruise performance sailor. 248 343 0599

The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.

Lire la suite

Propulsion
Carburant
Diesel
Ce Catalina 36 MkII a été vu 2 foi
Courtier / Concessionnaire Informations

Pier-1 Marine

Mr Joe DeFusco
4760 Taylor Road
Punta Gorda
33950
United States
Veuillez mentionner que vous avez vu ce bateau sur TheYachtMarket.
XXXX XXX XXX

Merci

Votre message a été envoyé.

Demander plus de photos

Envoyer un email à un ami

En soumettant ce formulaire, vous acceptez notre politique de confidentialité et relative aux cookies

En soumettant ce formulaire, vous acceptez notre politique de confidentialité et relative aux cookiesSite protégé par reCAPTCHA de Google La politique de confidentialité et les conditions d'utilisation s'appliquent

Générer un rapport sur ce bateau

Merci, votre message a été envoyé

Pourquoi ne pas enregistrer les annonces des bateaux similaires qui vous intéressent ?

Nous enverrons les informations suivantes aux vendeurs des bateaux sélectionnés. Votre nom, adresse e-mail, numéro de téléphone (s’il est fourni), votre pays et le ou les bateau(x) qui vous intéresse ou intéressent.

Demander plus d'informations

Changer les unités de mesure

Cette fonctionnalité nécessite que les cookies soient activés sur votre navigateur.

Afficher le prix en:

Afficher les longueurs, largeurs et tirants d'eau en :

Afficher le déplacement ou le poids en :

Afficher la capacité ou le volume en :

Afficher la vitesse en:

Afficher la distance en :