English
Built by Pacific Seacraft in 1997 to their exacting standards. Fitted with Yanmar 3GM 27hp. Fully battened mainsail and furling genoa. Harken furling gear and winches. B & G/Raytheon/Icom instrumentation. Beautiful teak joinery down below. Full coded inventory including all necessary safety equipment. A well presented package ready for the season with engine serviced, sails valeted and hull polished and anti-fouled. Priced to sell.
Rig
Sloop
BERMUDAN SLOOP
Masthead twin speader rig
Stainless standing rigging (new 2022)
Single line slab reefing
Fully battened mailsail with lazy jacks
Original mainsail
Furling headsail (130% genoa)
Spinnaker pole and gear
Inboard and outboard genoa tracks
Harken 4:1 mainsheet traveller
Harken lead cars
Dacron running rigging
All line led back to cockpit
NAVIGATION AIDS
Ritchie compass
Raymaine wind speed and depth on pedestal
B & G autopilot
B & G repeater at chart table
Furuno GPS chartplotter
Furuno Radar
ICOM M421 DSC VHF
GROUND TACKLE
11kg Bruce anchor with two 10m lengths (approx.) of 8mm chain and 32m (approx.) of 12mm warp
SAFETY EQUIPMENT
Auotmatic engine bay fire extinguisher
Three dry powder extinguishers
Fire blanket
Radar reflector
Two horseshoe lifebuoys
Jackstays
Searchlight
Emergency tiller
GENERAL EQUIPMENT
Navigation lights
Masthead lights
1x maunual bilge pump
1x automatic bilge pump
Warps and fenders
Boathook
Boarding ladder
Srayhood
Window covers
Mainsail cover
YANMAR 3GM 27HP DIESEL ENGINE
Shaft drive to two bladed propellor
Adjustable engine mounts
Control on pedestal
Cruising speed 5 knots
Maximum speed 6.5 knots
New prop shaft & cutlass bearing
Rudder realigned
Last serviced July 2024
ELECTRICS
Two 12volt batteries 80 amp capacity (3/4 yrs old)
Switched and charged by 55amp alternator
Shore power
Battery charger
TANKAGE
28 gallon / 107 litre aluminium fuel tank
Two water tanks, one 42 gallon (under saloon) and one 26 gallon (under forecabin)
One 20 gallon plastic holding tank
WATER SYSTEM
Pressuried hot and cold water system
6 gallon hotwater heater
Manual freshwater pump in galley
Manual seawater pump in galley
ERICSON 34 BUILT IN 1997
Designed and Built by Pacific Seacraft in U.S.A.
L.O.A. 34' 10"
L.W.L. 29' 0"
BEAM 11' 4"
DRAFT 6' 3"
DISPLACEMENT 5897kg
BALLAST 2359 kg
Hand laid GRP hull using mat, cloth and roving with vinylester resin and NPG iso-gelcoat
Hand laid GRP deck with balsa core sandwich with uni-direcional roving in high stress areas
Epoxied hull from new
Wheel steering
Stainless steel pulpit, pushpit and stanchions with guardwires and two access gates
Harken deck cleats
Fin keel