English
Fantastic opportunity to purchase this incoming Ancasta stock boat and beat the queue. This boat is due to arrive in Hamble in April 2025, it will premier at BOOT Dusseldorf so please do get in touch to arrange a viewing.
Rig
Sloop
RIG & RUNNING RIGGING
RIG & SAILS DIMENSIONS
Mast length
Mainsail
Jib
SLEEPS FOUR IN TWO CABINS
SALOON
GALLEY
FRONT CABIN
AFT CABIN
HEAD
Package Contents - Garmin instruments pack 2025
Garmin GMI 20 4" display port side of companionway
Airmar DST810 depth, speed & temp transducer
Wind transducer
24XD GPS antenna
Package Contents - Garmin chartplotter pack
GPSMAP 923 touchscreen chartplotter installed port side of companionway
Package Contents - F30 Garmin race mast displays
2 x GNX 120 LCD displays on bracket, under boom
Package Contents - Garmin Autopilot pack
GHP Reactor 40 autopilot system
Corse computer unit with solid-state 9-axis attitude heading reference system
GHC 50 4" touchscreen port side of companionway
Remote Control
Raymarine type 1 linear drive
Package Contents - 230V charging pack
230V circuit with 30 amp battery charger
Galvanic isolator
230V socket next to electric panel
Cockpit socket and shore power lead
Package Contents - Mooring Pack
4x mooring lines 10m
6x inflatable fenders
Garmin 215 VHF - with AIS
Deep Iron Keel
Facnor flatdeck jib furler
Bowsprit (integrated crane, anchor, chain & windlass)
Racing mainsheet system
Removeable wooden cockpit table
Bathing platform with cork panel
Cockpit shower
Front & aft foldable magnetic cabin doors
Interior LED lighting upgrade
Removable textile lockers in cabins
Integrated Dometic 36L top-loading fridge
Foldable wooden galley extension
25L water heater
2025 BENETEAU FIRST 30
Built by Seascape in Slovenia, designed by Samuel Manuard for the naval architecture and Lorenzo Argento for the design
CONSTRUCTION
Entire boat structure vacuum infused fibreglass with polyester resin
Fully cored hull with Corecell core and hand-laid vinylester skin coat
Fully cored deck with a moulded non-slip surface
Moulded and vacuum infused bulkheads with Mycell (PVC) core
Fully cored vacuum infused interior modules, designed to serve as boat's structure and furniture
White single tone gelcoat
Aluminium mast support
Cast iron keel with low drag fin and T-bulb; draft 2,25 m / 7' 5", weight 1550 kg / 3420 lbs
Double vacuum infused composited rudder blades with stainless steel stock
DIMENSIONS
LOA: 11.98m (39'4")
Hull Length: 11.00m (36'1")
LWL: 10.25m (33'8")
Hull Beam :3.80m (12'6")
Light displacement :4800 KG / 10580 lbs
Draft standard keel 2.25m (7'5")
Ballast 1550 kg / 34210 lbs
Upwind sail area 80 m² / 860 sq. ft
Downwind sail area 180 m² / 1930 sq. ft
ALL FIGURES ARE APPROXIMATE
RACING LAYOUT
In this configuration, the wide and modern cockpit offers the possibility to sail efficiently either for short-handed or fully-crewed sailing.
A higher than average steering wheel position leaves to the helmsman to move forward to the mainsail winch when sailing shorthanded.
The mainsail trimmers work efficiently thanks to the position of the winches.
CRUISING LAYOUT
In cruising mode, the additional lockers and their cushions offer increased seating capacity and comfort.
In the cockpit, 6 guests can sit around the table.
The ultra-light bathing platform extends the living space without compromising the boat's performance.